1. Checking transparent-sheet thickness
A configured OD Precision measurement setup can use the head’s transparent-material thickness function to inspect a sheet within the specified 0.3–2 mm interval. The measurement is compared with an application-specific nominal band, using the configured system interface for process evaluation. Actual material, alignment, warm-up and averaging are established during setup; the reference-target displacement repeatability is not treated as glass-thickness accuracy.
Problem Solved
A supported thickness measurement supplies external evaluation with a numerical sheet condition, helping distinguish dimensional variation from a simple presence signal in transparent-material handling.
Transparent material
0.3–2 mm
Thickness evaluation
2. Monitoring a reflective stage reference
A positioning fixture can present its reference surface inside 24–26 mm with the mirror aligned to the head optics. An RS-422 host reads displacement and compares the stationary position with a calibrated reference. The selected optical alignment and ambient conditions are established before evaluating small position changes; averaging is chosen for the application rather than assuming an unqualified precision figure.
Problem Solved
A numerical reference-surface measurement lets external control check a stationary stage position and retain its deviation from a calibrated target without contacting the moving fixture.
Reflective reference
RS-422
External position comparison
3. Recording surface vibration for external analysis
An external recorder can collect RS-422 distance values from a suitably aligned surface and relate the trace to elapsed time. Changes in that trace support analysis of periodic displacement. Sampling period, sensitivity-adjustment time, averaging and serial transfer settings determine the usable vibration conditions; the highly averaged static repeatability is not used as a guarantee for a moving target.
Problem Solved
A time-based displacement trace helps external analysis distinguish periodic movement from a steady position offset, supporting investigation of vibration in a fixture or moving assembly.
RS-422 trace
External vibration analysis
Sampling conditions