Omron CS1W-CN114 5 cm Peripheral Port Cable. 5 cm peripheral-port cable
for PLC serial connection. Supply status not confirmed.
The CS1W-CN114 is a 5 cm connecting cable used with the CQM1-CIF02 adapter for a computer-to-PLC serial connection through a CS/CJ-series peripheral port. Omron’s technical guide lists the CS1W-CN114 plus CQM1-CIF02 combination for Host Link at baud rates up to 19.2 kbps. Current supply status was not established from the checked manufacturer source.
5 cm peripheral-port cable for PLC serial connection.
| Parameter | Value |
|---|---|
| Product type | Peripheral-port connecting cable |
| Cable length | 0.05 m (5 cm) |
| Related adapter | CQM1-CIF02 |
| Connection use | Computer-to-PLC connection through CS/CJ-series peripheral port |
| Communication mode | Host Link, up to 19.2 kbps in the listed combination |
| Physical Weight (kg) | Not stated in the checked manufacturer source. |
| Dimensions L x W x H (cm) | Cable length is 5 cm; width and height are not stated. |
| Supply status | Unknown; exact model and product specifications confirmed from Omron documentation, current availability not established. |
Engineering suggestions require suitability checks for your installation.
The CS1W-CN114 is a 5 cm connecting cable used with the CQM1-CIF02 adapter for a computer-to-PLC serial connection through a CS/CJ-series peripheral port.
Confirm PLC series, port, rack configuration, electrical interface and protocol compatibility against the applicable Omron manual before selection.
Use the cable or communications board in a compatible Omron PLC installation.
Confirm controller series, port type, rack configuration and required protocol before installation.
Support connection, expansion or communications during compatible PLC setup and service.
Follow the relevant Omron installation manual and verify interface compatibility.
