Omron E2E-X1R5C18 2M NPN Proximity Sensor

Omron E2E-X1R5C18 2M NPN Proximity Sensor. M8 NPN sensor | 1.5 mm | 2 m
cable. Supply status not confirmed.

SKU Omron-E2E-X1R5C18 2M Category
Top Brands > Omron > Omron Proximity Sensors

Omron E2E-X1R5C18 2M NPN Proximity Sensor

BrandOmron
Model IdentifierE2E-X1R5C18 2M
Official Part NumberE2E-X1R5C18 2M

Technical Overview

The E2E-X1R5C18 2M is an Omron E2E NEXT shielded M8 inductive proximity sensor with a 1.5 mm nominal sensing distance. Omron lists it as a pre-wired 2 m model, NPN output, normally open, with a 38 mm body length. Current supply status was not established from the checked manufacturer source.

M8 NPN sensor | 1.5 mm | 2 m cable.

Key Features

  • Exact Omron model listed in E2E NEXT lineup
  • Shielded M8 inductive proximity sensor
  • 1.5 mm nominal sensing distance
  • NPN, normally open output
  • Pre-wired 2 m cable
  • 38 mm body length
  • Supply status: Unknown

M8 NPN sensor | 1.5 mm | 2 m cable

Technical Specification Matrix

ParameterValue
Sensor typeShielded inductive proximity sensor
SeriesE2E NEXT
Body sizeM8
Sensing distance1.5 mm
OutputNPN, normally open
ConnectionPre-wired cable, 2 m
Body length38 mm
Physical Weight (kg)Not stated for this exact model in the checked source.
Dimensions L x W x H (cm)Refer to Omron dimensional drawing; overall L × W × H not stated as a single value.
Supply statusUnknown; exact model and product specifications confirmed from Omron documentation, current availability not established.

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Machine position or presence sensing

Use the inductive sensor to detect compatible metal targets in an industrial machine.

Potential use

Select the model only after confirming target material, sensing distance, supply voltage, output circuit and mounting clearances.

inductive proximity sensor machine automation Omron

2. Metal target detection on machinery

Detect a compatible metal target at a defined point in a machine or production line.

Potential use

Check sensing distance, target dimensions, mounting and output circuit against the controller input.

metal detection machine automation

3. Position confirmation on automated equipment

Confirm presence or position of a metal component as part of an automated sequence.

Potential use

Allow for target material, approach direction, response frequency and installation clearances.

position detection industrial sensor
Select your currency