Omron E2F-X10F1 2M PNP Proximity Sensor

Omron E2F-X10F1 2M PNP Proximity Sensor. M30 PNP sensor | 10 mm | 2 m
cable. Supply status not confirmed.

SKU Omron-E2F-X10F1 2M Category
Top Brands > Omron > Omron Proximity Sensors

Omron E2F-X10F1 2M PNP Proximity Sensor

BrandOmron
Model IdentifierE2F-X10F1 2M
Official Part NumberE2F-X10F1 2M

Technical Overview

The E2F-X10F1 2M is an Omron shielded resin-case inductive proximity sensor in M30 size, with a 10 mm nominal sensing distance and DC three-wire PNP normally-open output. The manufacturer lists a 2 m pre-wired cable. The family specifications state a 12–24 VDC rated supply, 10–30 VDC operating range, IP68 protection and oil resistance. Current supply status was not established from the checked manufacturer source.

M30 PNP sensor | 10 mm | 2 m cable.

Key Features

  • Exact Omron model listed in E2F lineup
  • M30 shielded resin-case inductive sensor
  • 10 mm nominal sensing distance
  • DC three-wire PNP, normally open output
  • 2 m pre-wired cable
  • IP68 family protection rating
  • Supply status: Unknown

M30 PNP sensor | 10 mm | 2 m cable

Technical Specification Matrix

ParameterValue
Sensor typeShielded inductive proximity sensor
Body sizeM30
Sensing distance10 mm ±10%
Set distance0 to 8 mm
OutputDC 3-wire PNP, normally open
Rated supply voltage12–24 VDC
Operating voltage range10–30 VDC
ConnectionPre-wired cable, 2 m
ProtectionIP68; oil-resistant family design
Physical Weight (kg)Not stated for this exact model in the checked source.
Dimensions L x W x H (cm)Refer to Omron dimensional drawing; overall L × W × H not stated as a single value.
Supply statusUnknown; exact model and product specifications confirmed from Omron documentation, current availability not established.

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Machine position or presence sensing

Use the inductive sensor to detect compatible metal targets in an industrial machine.

Potential use

Select the model only after confirming target material, sensing distance, supply voltage, output circuit and mounting clearances.

inductive proximity sensor machine automation Omron

2. Metal target detection on machinery

Detect a compatible metal target at a defined point in a machine or production line.

Potential use

Check sensing distance, target dimensions, mounting and output circuit against the controller input.

metal detection machine automation

3. Position confirmation on automated equipment

Confirm presence or position of a metal component as part of an automated sequence.

Potential use

Allow for target material, approach direction, response frequency and installation clearances.

position detection industrial sensor
Select your currency