Omron E2F-X1R5E1 2M Proximity Sensor

Omron E2F-X1R5E1 2M: M8 NPN proximity sensor, 1.5 mm sensing range, IP68
resin case and 2 m cable.

SKU Omron-E2F-X1R5E1 2M Category
Top Brands > Omron > Omron Proximity Sensors

Omron E2F-X1R5E1 2M Resin-case Proximity Sensor

BrandOmron
Model IdentifierE2F-X1R5E1 2M
Official Part NumberE2F-X1R5E1 2M

Technical Overview

The Omron E2F-X1R5E1 2M is a shielded E2F resin-case inductive proximity sensor in M8 format. It detects ferrous targets at 1.5 mm nominal sensing distance and uses a DC 3-wire NPN normally-open output. The sensor runs from 12–24 V DC, has a 2 m pre-wired cable and an IP68 enclosure rating.

M8 NPN resin-case proximity sensor with 1.5 mm range and 2 m cable.

Key Features

  • Exact Omron model: E2F-X1R5E1 2M
  • Shielded M8 cylindrical proximity sensor
  • Sensing distance: 1.5 mm; set distance: 0 to 1.2 mm
  • Ferrous target: iron, 8 × 8 × 1 mm
  • DC 3-wire NPN output; NO
  • 12–24 V DC nominal; 10–30 V DC operating range
  • IP68 resin housing; oil-resistant family design
  • 2 m pre-wired cable; 17 mA max. current
  • Supply status: Unknown

M8 NPN resin-case proximity sensor with 1.5 mm range and 2 m cable.

Technical Specification Matrix

ParameterValue
Sensing principleInductive proximity sensor; shielded
Sensing head sizeM8
Sensing distance1.5 mm ±10%
Set distance0 to 1.2 mm
Differential travel10% max. of sensing distance
Detectable targetFerrous metal; sensing distance decreases with non-ferrous metals
Standard sensing objectIron, 8 × 8 × 1 mm
Response frequency2 kHz average
OutputDC 3-wire NPN open collector; normally open; 200 mA max.
Supply voltage12–24 VDC nominal (10–30 VDC operating); ripple 10% max.
Current consumption17 mA max.
Residual voltage2 V max. at 200 mA load, 2 m cable
Operating temperature−25 to 70 °C, no icing or condensation
Operating humidity35% to 95% RH
ProtectionIP68; Omron in-house oil-resistant rating
ConnectionPre-wired cable, 2 m
Housing materialPolyarylate resin case
Physical Weight (kg)Approx. 0.040 kg packed
Dimensions L x W x H (cm)Refer to Omron model-specific outline drawing

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Ferrous part presence detection

Detect a steel component at a machine fixture, transfer point or assembly station.

Potential use

Set the sensor within the specified operating distance and confirm target dimensions, mounting clearance and controller input polarity during commissioning.

M8 1.5 mm NPN

2. Water-exposed machine sensing

Monitor a ferrous target near equipment exposed to washdown or water ingress risk.

Potential use

Use the IP68 resin-case construction within the stated environmental ratings and validate the actual installation; avoid incompatible cutting-oil exposure.

IP68 2 m cable Ferrous target
Select your currency