USD 33.99
Omron E2S-W11 1M super-compact two-wire DC proximity sensor with top-facing 1.6 mm sensing and a 1 m pre-wired cable.
The Omron E2S-W11 1M is a super-compact rectangular inductive proximity sensor with a top-sensing face and 1.6 mm ±15% sensing distance. It uses dc two-wire, no; 3 to 50 ma max. load current, a 1 m pre-wired cable and IP67 protection. The current manufacturer catalog lists this model configuration and technical data but does not state present supply status, recorded as Unknown.
Super-compact two-wire DC inductive proximity sensor with 1.6 mm top sensing and a 1 m cable.
| Parameter | Value |
|---|---|
| Sensing principle | Inductive proximity sensing |
| Sensor format | Unshielded compact rectangular body; top sensing surface |
| Sensing distance | 1.6 mm ±15% |
| Set distance | 0 to 1.2 mm |
| Detectable object | Ferrous metal |
| Standard sensing object | Iron, 12 × 12 × 1 mm |
| Response frequency | 1 kHz min. |
| Output | DC two-wire, NO; 3 to 50 mA max. load current |
| Output switching mode | normally open |
| Power supply | 12 to 24 VDC rated (10 to 30 VDC operating range), 10% max. ripple |
| Current consumption | Not specified for this two-wire model |
| Leakage current | 0.8 mA max. |
| Residual voltage | 3 V max. at 50 mA with 1 m cable |
| Connection method | Pre-wired 1 m, 2.9 mm diameter vinyl-insulated round cable; 2 conductors |
| Operating temperature | −25 to 70 °C; no icing or condensation |
| Storage temperature | −40 to 85 °C; no icing or condensation |
| Relative humidity | Operating 35% to 90%; storage 35% to 95%, non-condensing |
| IP rating | IP67 (IEC 60529) |
| Housing material | Polyarylate resin |
| Physical Weight (kg) | Approx. 0.010 kg, packed state |
| Dimensions L x W x H (cm) | 2.51 x 0.84 x 0.64 (approx.; overall length with bracket) |
Engineering suggestions require suitability checks for your installation.
A constrained fixture may need to sense a small iron component using a top-facing target approach.
The 1.6 mm inductive sensing distance can detect a suitable ferrous target in a small sensor footprint; confirm installation clearance, target size and switching margin.
A compact automation station may need a discrete signal when a metal part or mechanism reaches a defined position.
The two-wire DC output and 1 m cable can connect to a compatible control input after verifying supply, load and NO/NC logic.
