Omron E3ZG-D62-S 2M NPN Diffuse Photoelectric Sensor

USD 25.02

Omron E3ZG-D62-S 2M diffuse photoelectric sensor has a 1 m range for 300 × 300 mm white paper, NPN output, 2 m cable and IP65 protection.

SKU Omron-E3ZG-D62-S 2M Category
Omron Photoelectric Sensors

Omron E3ZG-D62-S 2M Photoelectric Sensor

BrandOmron
Model IdentifierE3ZG-D62-S 2M
Official Part NumberE3ZG-D62-S 2M

Technical Overview

The Omron E3ZG-D62-S 2M is a compact photoelectric sensor with a built-in amplifier, NPN open-collector output and a pre-wired 2 m cable. It detects light reflected directly from a target, with a nominal 1 m sensing range referenced to white paper measuring 300 × 300 mm. The infrared LED operates at 870 nm, and the sensor provides an operate or reset response time of 1 ms maximum. A one-turn sensitivity adjuster and selectable Light-ON or Dark-ON operation support setup. The PBT housing has IP65 protection and carries local indicator feedback for installation and operation.

1 m diffuse-reflective sensor with NPN output, 1 ms response and a 2 m cable.

Key Features

  • Diffuse-reflective sensing
  • 1 m nominal detection range
  • NPN open-collector output
  • 12–24 VDC ±10% supply
  • 1 ms maximum operate/reset response
  • 870 nm infrared LED
  • Light-ON / Dark-ON selectable
  • Pre-wired 2 m cable
  • PBT housing; IP65 protection

Obtain NPN optical detection feedback with 1 m nominal white-paper reference range and a 1 ms maximum response.

Technical Specification Matrix

ParameterValue
Sensing methodDiffuse-reflective
Sensing distance1 m with white paper 300 × 300 mm
Optical arrangementEmitter and receiver in one housing; reflected-light detection
OutputNPN open collector
Operation modeLight-ON / Dark-ON selectable
Light sourceInfrared LED, 870 nm
Power supply12–24 VDC ±10%; ripple peak-to-peak 10% maximum
Current consumption30 mA maximum
Load rating100 mA maximum; load supply 26.4 VDC maximum
Residual voltage1 V maximum below 10 mA load; 2 V maximum from 10 to 100 mA
Response timeOperate or reset: 1 ms maximum
Sensitivity adjustmentOne-turn adjuster
Standard sensing objectWhite paper 300 × 300 mm as range reference
IndicatorOrange operation and green stability indicators
Protection circuitsSupply reverse-polarity; output short-circuit; output reverse-polarity protection; mutual interference prevention
Ambient lightIncandescent: 3,000 lx maximum; sunlight: 10,000 lx maximum
Operating temperature-25 to +55 °C; no freezing or condensation
Storage temperature-40 to +70 °C; no freezing or condensation
Operating humidity35–85% RH; no condensation
Storage humidity35–95% RH; no condensation
Insulation resistance20 MΩ minimum at 500 VDC
Dielectric strength1,000 VAC, 50/60 Hz, for 1 minute
Vibration resistance10–55 Hz; 1.5 mm double amplitude; 2 hours per axis
Shock resistance500 m/s²; 3 times per axis
IP ratingIP65 (IEC)
HousingPBT
Lens materialModified polyarylate
ConnectionPre-wired 2 m cable
AccessoriesInstruction manual; mounting brackets sold separately
Differential travel20% maximum of setting distance

Industrial Applications

1. Carton passage counting

A packaging conveyor moves separated cartons past a fixed inspection point. The diffuse-reflective sensor receives light returned by each carton and provides NPN switching transitions to a compatible counter input. Its nominal 100 mm range is referenced to the specified white-paper target; carton finish and spacing establish the usable working gap and pulse separation.

Problem Solved

Converts successive reflected-light events into discrete counting transitions, supporting carton tracking without a reflector across the conveyor or mechanical contact with passing packages.

Carton counting 1 ms

2. Component seating in an assembly nest

An assembly nest needs to distinguish a correctly seated component from an empty loading position. The sensor faces a suitable target area and measures the light returned to its receiver. The one-turn adjuster sets sensitivity for the optical difference between loaded and empty conditions, while the selected Light-ON or Dark-ON wiring defines the machine input logic.

Problem Solved

Provides a noncontact loaded-or-empty condition at the assembly nest, allowing the sequence to identify a missing component through a repeatable reflected-light difference.

Fixture occupancy Adjustable sensitivity

3. Accumulation at a transfer stop

A transfer stop needs to identify packages accumulating at its waiting position. The sensor looks toward the intended package surface and changes its output as returned light crosses the adjusted threshold. Local operation and stability indicators expose the sensing condition, helping operators observe when the transfer position is occupied during the feed sequence.

Problem Solved

Supplies a local occupied-position signal for accumulation control, allowing the feed sequence to respond to a waiting package without installing a contacting actuator in the transfer path.

Accumulation feedback NPN output
Select your currency