Panasonic MDDLN55SG011 MINAS A6SG Servo Driver

USD 490.00

Panasonic MDDLN55SG011 MINAS A6SG D-frame servo driver with 200–240 V input, 3.2 kHz response, pulse control and Modbus RTU communications.

SKU Panasonic-MDDLN55SG011 Category
Top Brands > Panasonic > Panasonic ServoDrivers

Panasonic MDDLN55SG011 MINAS A6SG Servo Driver

BrandPanasonic
Model IdentifierMDDLN55SG011
Official Part NumberMDDLN55SG011

Technical Overview

The Panasonic MDDLN55SG011 is a custom-specification version of the MINAS A6SG D-frame servo driver; Panasonic defines the final three model-code positions as the custom-specification field and currently lists the MDDLN55SG base style as an A6SG special-order product. The driver provides pulse-train position control, a 3.2 kHz frequency response, 23-bit absolute-encoder feedback, and USB, RS232, RS485 and Modbus RTU communications. Its main circuit accepts single- or three-phase 200–240 V AC, while the D-frame body measures 85 × 150 × 170 mm and weighs 2.1 kg; the approved specification for suffix 011 should be checked for any custom deviations before installation.

MINAS A6SG D-frame servo driver with 3.2 kHz response, pulse positioning, 23-bit encoder feedback and Modbus RTU communications.

Key Features

  • MDDLN55SG base style with Panasonic custom-specification suffix 011
  • MINAS A6SG special-order servo driver in a D-frame housing
  • 3.2 kHz frequency response for responsive position control
  • Pulse-train command input with up to 8 Mpps line-receiver operation
  • USB, RS232, RS485 and Modbus RTU communication interfaces
  • 23-bit absolute-encoder feedback with 8,388,608-count resolution
  • 10 general-purpose control inputs and 6 general-purpose control outputs
  • Built-in regenerative resistor and dynamic brake
  • Current Panasonic MDDLN55SG product listing; confirm the 011 approval specification before commissioning

3.2 kHz response with pulse positioning and Modbus RTU serial connectivity.

Technical Specification Matrix

ParameterValue
Manufacturer part numberMDDLN55SG011
Base style / custom specificationMDDLN55SG / 011; Panasonic defines positions 10–12 as the custom-specification field
Product familyMINAS A6
Series / typeA6SG series; RS485/RS232 communication type (pulse train only)
LifecycleCurrent Panasonic special-order base model listing; verify availability and the 011 approval specification with Panasonic
FrameD-frame
Frequency response3.2 kHz
Control methodIGBT PWM sinusoidal drive; position control
Control modesPosition control, internal velocity command, or position/internal velocity command
Maximum applicable motor ratingUp to 1.5 kW, depending on the manufacturer-approved motor combination
Main-circuit input powerSingle- or three-phase 200–240 V AC (+10%, −15%), 50/60 Hz
Control-circuit input powerSingle-phase 200–240 V AC (+10%, −15%), 50/60 Hz
Input power capacityApproximately 2.3 kVA for the MDDL*55** frame code
Encoder feedback23-bit absolute encoder; 8,388,608-count resolution; 7-wire serial interface
Command pulse input2 inputs; photocoupler and line receiver
Maximum command pulse frequency500 kpps via photocoupler; 8 Mpps via line receiver
Control signal inputs10 general-purpose inputs with parameter-assigned functions
Control signal outputs6 general-purpose outputs with parameter-assigned functions
Analog monitor outputs2
Pulse signal outputs4 total: 3 line-driver outputs and 1 open-collector output
Communication interfacesUSB, RS232, RS485 and Modbus RTU
Serial topologyRS232 1:1; RS485 and Modbus RTU 1:n; RS485 supports up to 31 axes
Parallel I/O connector50-pin JAE DF02R050NA2 or equivalent, per Panasonic A6 driver documentation
RegenerationBuilt-in regenerative resistor; external regenerative resistor supported
Dynamic brakeBuilt in
Operating temperature0–55 °C, non-freezing
Storage temperature−20–65 °C, non-condensing
Operating and storage humidity20–85% RH, non-condensing
Installation altitude1,000 m or less above sea level
Vibration resistance5.88 m/s² or less at 10–60 Hz
Dielectric strength1,500 V AC for 1 minute between primary power supply and ground; 20 mA sensing current
Safety functionWithout functional safety
IP ratingNot stated in the cited Panasonic product specifications
Housing materialNot stated in the cited Panasonic product specifications
Physical Weight (kg)2.1
Dimensions L x W x H (cm)17.0 x 8.5 x 15.0 (D x W x H)

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Pulse-command assembly positioning

Automated assembly and pick-and-place equipment often needs fast, repeatable point-to-point motion driven by pulse commands from a PLC or motion controller.

Potential use

The 3.2 kHz response, high-speed line-receiver pulse input and 23-bit encoder feedback can support precise positioning when the selected motor, mechanics and suffix-011 approval specification are verified for the axis.

3.2 kHz 8 Mpps 23-bit feedback Position control

2. Multi-axis packaging machinery

Packaging lines may coordinate several servo axes while exposing drive parameters and status to a supervisory controller over a serial network.

Potential use

RS485 and Modbus RTU support 1:n communication, with Panasonic specifying up to 31 axes on RS485, while the pulse interface handles the real-time positioning command.

RS485 Modbus RTU Up to 31 axes Pulse train

3. Compatible MINAS A6 machine axis

A new or replacement axis may require a D-frame 200 V-class A6SG driver for a Panasonic-approved servo-motor combination up to 1.5 kW.

Potential use

Use the published D-frame electrical and mechanical data to plan the control cabinet, then confirm the motor combination, connector set, parameter file and custom 011 specification before commissioning.

200–240 V AC D-frame Up to 1.5 kW A6SG
Select your currency