1. Confirming pressure before a pneumatic process step
A pneumatic station can connect the sensor to a compatible pressure point and configure a switching condition for the pressure required before an ordinary process step. External sequencing logic evaluates the selected PNP or NPN output. Commissioning checks process connection, media compatibility, measuring range, pressure transients and response against the actual operating conditions and required pressure margin.
Problem Solved
A measured-pressure condition helps external sequencing logic confirm the monitored pneumatic state before advancing, with the switching threshold and installation checked against the process requirement.
Pneumatic pressure
Switching condition
Process sequencing
2. Using two pressure conditions for external sequencing
A process station can configure the two switching functions to represent pressure conditions needed by external sequencing logic. The controller evaluates Q1 and Q2 according to the installation’s chosen PNP or NPN behavior. Commissioning checks the actual pressure range, threshold settings, measurement accuracy and response, and confirms each condition using representative operating cycles and a suitable reference measurement.
Problem Solved
Two pressure conditions help external sequencing logic distinguish monitored process states, with threshold margins checked against the application’s pressure variation and the sensor’s stated measurement limits.
Pressure conditions
Two switching functions
External sequencing
3. Checking indicated pressure during machine commissioning
Commissioning staff can use the four-digit local display to compare the monitored pressure with the expected process condition while a compatible controller reads the sensor through IO-Link. Mechanical and electronic display rotation support a readable orientation at the installed port. Setup verifies connection sealing, media suitability, actual pressure and temperature, and the configured switching behavior before ordinary operation.
Problem Solved
Local pressure indication and connected IO-Link access help commissioning staff check the installed sensor condition, supporting comparison with the process reference and confirmation of configured switching behavior.
Local pressure check
IO-Link setup
Display orientation