SICK 1060130 RZC1-04ZRS-KRD Reed NO Cylinder Sensor

USD 48.88

Reed C-slot cylinder sensor with 500 Hz switching, 5–30 V AC/DC supply, 0.5 m PUR cable and M8 three-pin plug with knurled nut, plus IP68.

SKU SICK-1060130 Category
SICK RZC1

SICK RZC1-04ZRS-KRD Reed Cylinder Sensor

BrandSICK
Model IdentifierRZC1-04ZRS-KRD
Official Part Number1060130

Technical Overview

The SICK RZC1-04ZRS-KRD is a reed magnetic cylinder sensor with a normally-open output for direct C-slot mounting. It detects a compatible piston magnet and supplies a local switching event to external machine control. Switching frequency is 500 Hz, typical overrun distance is 7 mm and reproducibility is specified with supply voltage and ambient temperature constant. The sensor operates from 5–30 V AC/DC, with continuous current limited to 500 mA and switching capacity limited to 10 W. Its axial 0.5 m PUR cable terminates in an M8 three-pin plug with a knurled nut and supports documented drag-chain use. The reinforced PA housing provides IP68 protection and LED indication.

Reed NO C-slot cylinder sensor with 500 Hz switching, 5–30 V AC/DC supply and a 0.5 m PUR cable with M8 three-pin plug and knurled nut.

Key Features

  • Reed normally-open output; AC/DC three-wire circuit
  • Direct C-slot mounting; 26.3 mm housing length
  • 500 Hz switching; typical overrun distance7 mm
  • 5–30 V AC/DC supply; continuous current≤500 mA
  • Switching capacity≤10 W; voltage drop<0.5 V
  • Reproducibility≤0.1 mT at constant supply and ambient temperature
  • Axial0.5 m PUR cable with M8 three-pin plug and knurled nut
  • 300,000 torsion cycles; 5,000,000 drag-chain cycles under documented conditions
  • Reinforced PA plastic housing; IP68; −30 to+80 °C operation
  • Output-state LED; no teach-in

Connect local magnetic piston-arrival detection to external AC or DC control using a C-slot reed sensor and a 0.5 m M8 connector cable.

Technical Specification Matrix

ParameterValue
Functional principleMagnetic reed cylinder-piston detection
Cylinder typeC-slot; direct mounting
Cylinder types with adapterSMC rail CDQ2/ECDQ2; suitable adapters required
Housing length26.3 mm
Switching outputReed
Output functionNO; normally open
Electrical wiringAC/DC three-wire
Switching frequency500 Hz
Power supply5–30 V AC/DC
No-load current5 mA
Voltage drop<0.5 V
Continuous current≤500 mA
Switching capacity≤10 W
Protection classIII
Overrun distanceTypical7 mm; magnet travel while switching signal is output
Reproducibility≤0.1 mT with supply voltage and ambient temperature constant
Status indicatorLED
Teach-inNot provided
Operating temperature−30 to+80 °C
Shock resistance30 g,11 ms
Vibration resistance10–55 Hz,1 mm
EMCEN60947-5-2
Connection0.5 m PUR cable with M8 three-pin plug and knurled nut;drag-chain use
Conductor cross-section0.09 mm²
Cable diameter2.2 mm
Bending radiusFixed installation>2×cable diameter;flexible use>5×cable diameter
Torsion specification±270° per0.1 m
Torsion cycles300,000
Drag-chain cycles5,000,000
Drag-chain test conditionsSpeed≤3 m/s;acceleration≤10 m/s²;at least5 million bending cycles
Cable outletAxial
Housing materialPlastic;reinforced PA
Cable materialPUR
Conductor functions1/BN=L+/L1;3/BU=M/N;4/BK=NO output;CD-036
IP ratingIP68 per EN60529;sheet references IP67/IP68
Mounting screwSW1.5;typical tightening torque0.5 Nm
UL fileNRKH.E181493 and NRKH7.E181493
MTTFD41,230 years
Diagnostic coverage DCavg0%
Mission time20 years

Industrial Applications

1. Confirming cylinder arrival before a transfer step

A material-transfer cylinder can carry its compatible piston magnet past a sensor fixed at a defined C-slot position. The reed normally-open output gives the external sequence controller a local arrival condition before advancing the next mechanism. The status LED provides local indication, and the controller qualifies the event within the documented switching and current limits.

Problem Solved

A local magnetic arrival condition gives external sequence control a piston-position reference without a mechanical sensing lever contacting the moving cylinder rod during repeated transfer operations.

Cylinder arrival C-slot reed NO

2. Measuring cylinder travel time with external control

A controller can timestamp its cylinder-move command and the sensor switching event at the monitored destination to calculate an external travel-time interval. The sensor supplies the local magnetic arrival signal;it does not calculate elapsed time. Repeatability under constant supply and ambient temperature provides a documented reference for comparing repeated arrival events.

Problem Solved

Command-to-arrival timing lets external control identify a stroke that arrives later than its configured process limit,supporting machine diagnostics through a repeatable local switching event rather than a fixed wait alone.

External travel timing Arrival event Repeatability

3. Counting completed cylinder cycles

A handling cylinder can produce one qualified magnetic arrival event at the monitored stroke position for each completed cycle. Compatible external counting equipment accumulates the reed switching transitions and filters repeated events according to machine logic. The500 Hz switching frequency and documented overrun behavior provide timing references when selecting cylinder speed and event qualification.

Problem Solved

A qualified piston-arrival event supports external cycle counting for throughput or maintenance records,without a mechanical counting contact against the rod or an assumed elapsed-time estimate of completed motion.

Cycle counting 500 Hz External counter
Select your currency