$ 473.80
| Signal type | Analog input |
| Operation time | MTBF: 353 a acc. to SN 29500 stationary continuous operating, average ambient temperature 40 °C (104 °F) |
| Connection | Power Bus or terminals 1-, 2+ | |
| Rated voltage | Ur | 16.8 … 31.2 V DC |
| Power dissipation | 0.7 W | |
| Power consumption | 0.8 W |
| Programming interface | programming socket |
| Connection side | field side | ||||||||
| Connection | terminals 5, 6, 7, 8 | ||||||||
| PTC | type KT, KTY, ST | ||||||||
|
|||||||||
| RTD | type Pt100, Pt200, Pt500, Pt1000 (EN 60751:1995) type Ni100, Ni200, Ni500, Ni1000 (DIN 43760) |
||||||||
|
|||||||||
| Thermocouples | type B, E, J, K, N, S, T (IEC 584-1:1995) type L, U (DIN 43710:1985) type C, D (ASTM E988) |
||||||||
|
|||||||||
| Resistor | |||||||||
|
|||||||||
| Potentiometer | 0.2 … 50 kΩ | ||||||||
|
|||||||||
| Voltage | -100 … 100 mV -1000 … 1000 mV |
||||||||
| Input resistance | ≥ 1 MΩ | ||||||||
| Connection side | control side |
| Connection | terminals 3-, 4+ |
| Analog voltage output | 0/1 … 5 V , 0/2 … 10 V , load ≥ 2 kΩ |
| Analog current output | 0/2 … 10 mA, 0/4 … 20 mA, load ≤ 600 Ω |
| Ripple | ≤ 10 mV eff |
| Fault signal | downscale or upscale |
| Accuracy | max. 0.1 % of full-scale value | ||||||||
| Measuring time | ≤ 300 ms | ||||||||
| Deviation | |||||||||
|
|||||||||
| Influence of ambient temperature | < 100 ppm/K of full-scale value | ||||||||
| Output/power supply | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min |
| Input/Other circuits | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min |
| Control elements | DIP switch keys |
| Configuration | via DIP switches via keys via software |
| Labeling | space for labeling at the front |
| Electromagnetic compatibility | ||||
|
||||
| Degree of protection | IEC 60529:2001 |
| Protection against electrical shock | EN 61010-1:2010 |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| Degree of protection | IP20 | ||||||
| Connection | screw terminals | ||||||
| Core cross section | 0.5 … 2.5 mm2 (20 … 14 AWG) | ||||||
| Mass | approx. 70 g | ||||||
| Dimensions | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1 | ||||||
|
|||||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | ||||||
| Certificate | DEMKO 16 ATEX 1750X | ||
|
|||
| Directive conformity | |||
|
|||
| UL approval | E106378 | ||||
| IECEx approval | |||||
|
|||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Weight | 0.070 kg |
|---|---|
| Dimensions | 10.7 × 0.62 × 9.7 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penang
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
II 3G Ex nA IIC T4 Gc
