Sale!

Festo 8063974 Position Transmitter, Hall Sensor, IO-Link, M8

Original price was: USD 133.64.Current price is: USD 115.44.

T-slot Hall position transmitter with 52 mm sensing range, 0.02 mm resolution, two configurable PNP/NPN outputs, IO-Link and 0.3 m cable with M8 plug.

SKU Festo-8063974 Category
Festo Position Sensors

Festo SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8 Position Transmitter

BrandFesto
Model IdentifierSDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8
Official Part Number8063974

Technical Overview

The Festo SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8 is a magnetic Hall position transmitter for compatible T-slot drives. Its exact-part datasheet specifies a 52 mm sensing range, 0.02 mm displacement resolution, 0.2 mm repetition accuracy and ±1 mm typical linearity error. Two switching outputs can be configured as PNP or NPN, with normally open or normally closed functions. IO-Link V1.1 provides measured-position and switching-signal process data through COM2 communication, with a 2.5 ms minimum cycle time. The 9.5 g unit has a 0.3 m PUR cable with four-pin A-coded M8 plug, top-insertable screw-clamped mounting and IP65/IP68 protection.

T-slot Hall position transmitter with 52 mm sensing range, 0.02 mm resolution, configurable PNP/NPN switching and IO-Link position data.

Key Features

  • Magnetic Hall position measurement for compatible T-slot drives
  • 52 mm sensing range stated in the exact-part datasheet
  • 0.02 mm displacement resolution, 0.2 mm repetition accuracy and ±1 mm typical linearity error
  • Two configurable PNP or NPN outputs with selectable NC/NO function
  • IO-Link Device V1.1, I-Port and COM2 at 38.4 kBaud
  • Two-byte IO-Link input: 12-bit measured position and 4-bit switching signal
  • 2 ms typical sampling interval and 3 m/s maximum travel speed
  • 10–30 V DC operation and 50 mA maximum output current
  • 0.3 m PUR cable with four-pin A-coded M8 plug; energy-chain/robot suitability under stated test conditions
  • 9.5 g product weight, top-insertable screw clamping and IP65/IP68 protection

Read measured drive position through IO-Link and configure two switching outputs from one compact Hall transmitter mounted in the T-slot.

Technical Specification Matrix

ParameterValue
DesignFor T-slot
ApprovalRCM; c UL us - Listed (Oil)
CE mark (see declaration of conformity)To EU EMC Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions
Certificate issuing authorityUL E232949
Note on materialsRoHS compliant; Free of halogen
Instructions on usehttps://www.festo.com/Drive-Sensor-Overview
Measured variablePosition
Measuring principleMagnetic Hall
Sensing range52 mm
Ambient temperature-40 °C...80 °C
Typical sampling interval2 ms
Max. travel speed3 m/s
Displacement resolution0.02 mm
Repetition accuracy0.2 mm
Switching output2x PNP or 2x NPN, adjustable
Switching element functionNC or NO, switchable
Switch-on time4 ms
Switch-off time4 ms
Max. switching frequency125 Hz
Max. switching output voltage DC30 V
Max. output current50 mA
Max. switching capacity DC1.5 W
Voltage drop0.5 V
Typical linearity error±1 mm
Short circuit current ratingYes
Overload protectionAvailable
ProtocolI-Port; IO-Link®
IO-Link, Protocol versionDevice V 1.1
IO-Link, ProfileSmart sensor profile
IO-Link, Function classesProcess data variable (PDV); Identification; Diagnostics; Teach channel; Switching signal channel (SSC)
IO-Link, communication modeCOM2 (38.4 kBaud)
IO-Link, SIO-Mode supportYes
IO-Link, Port classA
IO-Link, Process data length IN2 bytes
IO-Link, Process data content IN12 bit PDV (measured position value); 4 bit SSC (Switching Signal)
IO-Link, Min. cycle time2.5 ms
Operational voltage range DC10 V...30 V
Residual ripple10%
No-load supply current12 mA
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typeCable with plug
Electrical connection 1, connector systemM8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores4
Electrical connection 1, type of mountingScrew-type lock
Connection outlet orientationIn-line
Material electrical contactGold-plated copper alloy
Test conditions cableBending strength: to Festo standard; Torsional strength: > 300,000 cycles, ±270°/0.1 m; Energy chain: > 5 million cycles, bending radius 28 mm
Cable length0.3 m
Cable characteristicSuitable for energy chains/robot applications
Cable sheath colourGrey
Material cable sheathTPE-U(PUR)
Type of mountingScrew-clamped; Insertable in the slot from above
Mounting positionAny
Physical Weight (kg)0.0095
Material housingReinforced PA; High-alloy stainless steel
Material union nutNickel-plated brass
Switching status indicationYellow LED
Status indicationLED red
Setting optionsIO-Link®; Capacitive pushbutton
Ambient temperature with moving cable-20 °C...70 °C
Degree of protectionIP65; IP68
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1

Industrial Applications

1. Measured Stroke Observation on a Pneumatic Fixture

A fixture needs to observe where its compatible magnetic drive is positioned within the sensing region, rather than receive only an endpoint switch signal. The transmitter supplies a 12-bit measured-position value through IO-Link process data. Its 0.02 mm resolution, 0.2 mm repetition accuracy and ±1 mm typical linearity error describe different aspects of the measurement and remain distinct in the machine evaluation.

Problem Solved

Measured-position data gives the controller information throughout the sensing region, supporting stroke observation beyond a single switching event while retaining explicit resolution, repetition and linearity characteristics.

12-bit position data IO-Link COM2 0.02 mm resolution

2. Two Switching Signals for Fixture Sequencing

An assembly station needs two position-dependent switching signals from a compatible T-slot drive. The transmitter provides two outputs configurable as PNP or NPN, with switchable normally open or normally closed behaviour. Its top-insertable screw-clamped mounting positions the sensing unit in the drive slot, while yellow switching indication provides local feedback alongside the electrical outputs.

Problem Solved

Two configurable switching outputs provide separate position-dependent signals from one sensing unit, allowing the fixture sequence to use the required output polarity and contact behaviour.

Two switching outputs PNP/NPN configurable NC/NO selectable

3. Remote Sensor Setup During Format Changeover

A machine changes fixture formats and needs access to the position sensor's setup functions through the control system. This transmitter supports IO-Link settings and a Smart Sensor Profile with teach, identification and diagnostics function classes. A capacitive pushbutton also provides a local setting interface, enabling the sensor configuration to be handled at the device or through the documented communication connection.

Problem Solved

IO-Link setup and teach functions make the sensor configuration accessible through the machine connection, supporting format changes without relying exclusively on reaching the local pushbutton.

IO-Link settings Teach channel Smart Sensor Profile
Select your currency