| Product type | Multiturn absolute encoder; standard non-safety product |
| Steps per revolution | 262,144, 18 bit |
| Number of revolutions | 4,096, 12 bit |
| Maximum resolution | 18 bit × 12 bit; 262,144 steps/revolution × 4,096 revolutions |
| Error limits G | 0.03°, DIN ISO 1319-1; upper/lower error-limit position depends on installation; specified value assumes symmetric positive and negative deviation |
| Repeatability standard deviation | σr=0.002°, DIN ISO 55350-13; 68.3% of measured values within the stated area |
| Communication interface | PROFINET |
| Encoder profile | V4.1 class 3 |
| Data transmission rate | 10 / 100 Mbit/s |
| Transmission medium | CAT-5e cable |
| Initialization time | 6 s |
| Cycle time | ≤1 ms |
| Configurable parameters | Steps per revolution; number of revolutions; PRESET; counting direction; speed-calculation sampling rate; speed output unit; round-axis functionality |
| Diagnostics | Minimum/maximum temperature; maximum speed; power-on counter; operating-hours counters for power-on/motion; direction-change counter; CW/CCW movement counters; maximum supply voltage |
| Power connection | One M12 four-pin A-coded male connector, axial |
| Ethernet connections | Two M12 four-pin D-coded female connectors, axial |
| Power connector pins | 1 BN=10–30 V DC; 2 WH=not assigned; 3 BU=GND; 4 BK=not assigned |
| Ethernet connector pins | Ports 1 and 2: 1 yellow=TxD+; 2 white=RxD+; 3 orange=TxD−; 4 blue=RxD− |
| Local controls and indication | Preset push-button; SF, BF, L/A1 and L/A2 indicators; decimal switches shown out of operation |
| Power supply | 10–30 V DC |
| Power consumption | ≤3 W without load |
| Circuit protection | Reverse-polarity protection |
| Shaft configuration | 8 mm blind hollow shaft; front clamp |
| Shaft material | Stainless steel |
| Flange and housing material | Aluminum |
| Start-up torque | 0.8 Ncm at +20 °C |
| Operating torque | 0.6 Ncm at +20 °C |
| Permissible static movement | ±0.3 mm radial; ±0.5 mm axial |
| Permissible dynamic movement | ±0.05 mm radial; ±0.1 mm axial |
| Operating speed | ≤6,000 rpm; allow self-heating of 3.3 K per 1,000 rpm when defining the operating temperature range |
| Rotor moment of inertia | 40 gcm² |
| Bearing lifetime | 3 × 10⁹ revolutions |
| Angular acceleration | ≤500,000 rad/s² |
| Shaft engagement in attachment drawing | Minimum 15 mm; maximum 40 mm |
| IP rating | IP65 shaft side; IP67 housing side, IEC 60529; with mating connectors fitted |
| Relative humidity | 90%; condensation not permitted |
| Operating temperature | −40 to +85 °C |
| Storage temperature | −40 to +100 °C without package |
| Shock resistance | 100 g, 6 ms, EN 60068-2-27 |
| Vibration resistance | 30 g, 10–2,000 Hz, EN 60068-2-6 |
| EMC | EN 61000-6-2 and EN 61000-6-3 |
| MTTFD | 80 years, EN ISO 13849-1; nominal component load, average +40 °C and 8,760 h/year; all electronic failures considered hazardous; no safety-component rating |
| Physical Weight (kg) | 0.2 |