| Functional principle | Absolute rotary encoder |
| Mechanical design | Solid shaft; servo flange |
| Singleturn resolution | Maximum 262,144 steps per revolution, 18 bit |
| Multiturn range | 4,096 revolutions, 12 bit |
| Maximum combined resolution | 18 bit ×12 bit; 262,144 ×4,096 |
| Error limits G | 0.03° to DIN ISO 1319-1; symmetric upper/lower error-limit position, dependent on installation |
| Repeatability | Standard deviation σr =0.002° to DIN ISO 55350-13; 68.3% of measured values within specified interval |
| Communication interface | PROFINET |
| Encoder profile | V4.1 Class 3 |
| Data transmission rate | 10 / 100 Mbit/s |
| Transmission medium | CAT-5e cable |
| Initialization time | 6 s |
| Cycle time | ≤1 ms |
| Configurable parameters | Steps per revolution; number of revolutions; PRESET; counting direction; speed-calculation sampling rate; speed-output unit; round-axis functionality |
| Diagnostic data | Minimum/maximum temperature; maximum speed; power-on counter; operating hours power-on/motion; direction-change and CW/CCW movement counts; maximum supply voltage |
| Power supply | 10–30 V DC |
| Power consumption | ≤3 W without load |
| Electrical protection | Reverse-polarity protection |
| Power connection | One axial M12 four-pin A-coded male connector |
| Network connections | Two axial M12 four-pin D-coded female connectors, Port 1 / Port 2 |
| Power pin assignment | 1 BN=10–30 V supply; 2 WH=not assigned; 3 BU=GND; 4 BK=not assigned; do not use pins 2 and 4 |
| Network pin assignment | Each port: 1 YE=TxD+; 2 WH=RxD+; 3 OG=TxD−; 4 BU=RxD− |
| Local controls and indicators | Preset push-button; SF, BF, L/A1, L/A2 and Encoder indicators; decimal switches are out of operation |
| Shaft | Stainless steel; Ø6 mm with flat; length 10 mm |
| Flange material | Aluminum |
| Housing material | Aluminum |
| Startup torque | 0.5 Ncm at +20 °C |
| Operating torque | 0.3 Ncm at +20 °C |
| Permissible shaft load | 80 N radial; 40 N axial |
| Operating speed | ≤9,000 rpm; allow self-heating of 3.3 K per 1,000 rpm when defining operating-temperature range |
| Rotor inertia | 6.2 gcm² |
| Bearing lifetime | 3 ×10^9 revolutions |
| Angular acceleration | ≤500,000 rad/s² |
| Mounting holes | Three M4 holes, 8 mm deep, at 120° on Ø42 ±0.05 mm circle |
| Shaft-side enclosure rating | IP65, IEC 60529 |
| Housing-side enclosure rating | IP67, IEC 60529, with mating connector fitted |
| Relative humidity | 90%; condensation not permitted |
| Operating temperature | −40 to +85 °C; account for speed-related self-heating |
| Storage temperature | −40 to +100 °C without packaging |
| Shock resistance | 100 g, 6 ms, EN 60068-2-27 |
| Vibration resistance | 30 g, 10–2,000 Hz, EN 60068-2-6 |
| EMC | EN 61000-6-2 and EN 61000-6-3 |
| MTTFD | 80 years to EN ISO 13849-1; standard product, not a safety component; calculation at nominal component load, +40 °C average and 8,760 h/year, treating electronic failures as hazardous |
| Physical Weight (kg) | 0.2 |