SICK 1036727 DFS60A-S4PK65536 Programmable TTL/HTL Encoder

USD 672.10

65,536-pulse incremental encoder with programmable TTL/HTL levels, factory TTL output, 10 ×19 mm solid shaft and 1.5 m eight-wire universal cable.

SKU SICK-1036727 Category
SICK Encoders

SICK DFS60A-S4PK65536 Programmable TTL/HTL Encoder

BrandSICK
Model IdentifierDFS60A-S4PK65536
Official Part Number1036727

Technical Overview

The SICK DFS60A-S4PK65536 is a programmable 65,536-pulse-per-revolution incremental encoder with six TTL/HTL channels and a factory TTL output level. Its 10 mm solid shaft has a flat and 19 mm length, with a face-mount flange and 1.5 m eight-wire universal cable. A, B and Z signals include inverted counterparts; electrical zero-pulse widths and a 1–359° mechanical zero-pulse width can be configured. The 4.5–32 V device provides output frequency up to 820 kHz, so usable shaft speed depends on the selected pulse count as well as the mechanical speed limit. Stainless steel shaft and aluminum construction support rotary integration, with IP67 on the housing/cable-connection side and IP65 at the shaft.

65,536 PPR programmable TTL/HTL incremental encoder with factory TTL level, 10 ×19 mm solid shaft and 1.5 m eight-wire universal cable.

Key Features

  • 65,536 pulses per revolution; observe pulse-count and frequency speed limits
  • Six TTL/HTL channels with factory TTL output level
  • Programmable electrical zero-pulse widths of 90°, 180° or 270°
  • Mechanical zero-pulse width programmable from 1° to 359°
  • 10 ×19 mm solid shaft with flat; face-mount flange
  • 1.5 m eight-wire universal cable
  • 4.5–32 V supply; ≤0.7 W without load; load current ≤30 mA
  • Output frequency ≤820 kHz; 32 ms initialization or 30 ms with mechanical index width
  • 80 N radial and 40 N axial permissible shaft loading
  • IP67 housing/cable-connection side; IP65 shaft side; cable-dependent temperature limits

Configure output level and index width while delivering 65,536-pulse incremental feedback within the pulse-frequency and mechanical speed limits.

Technical Specification Matrix

ParameterValue
Product typeIncremental rotary encoder
Pulses per revolution65,536; observe manufacturer maximum-revolution characteristic and output-frequency limit
Measuring step90° electrical / pulses per revolution
Measuring-step deviation±0.0015° at binary number of lines
Error limits±0.03°
Electrical interfaceTTL / HTL programmable; factory output level TTL
Signal channelsSix: A, A inverted, B, B inverted, Z, Z inverted
Initialization time32 ms; 30 ms with mechanical zero-pulse width
Output frequency≤820 kHz
Load current≤30 mA
Power consumption≤0.7 W without load
Power supply4.5–32 V
Reference signalOne; 90° electrical, logically gated with A and B
Connection1.5 m eight-wire universal cable
Screen connectionScreen connected to housing on encoder side and ground on control side
Reverse-polarity protectionProvided
Output short-circuit protectionTTL programmed at supply ≥5.5 V: against another channel or GND for maximum 30 s; HTL or TTL below 5.5 V: against another channel, Us or GND for maximum 30 s
Mechanical designSolid shaft with flat; face-mount flange
Shaft sizeØ10 mm f7 ×19 mm; axial length 19 ±0.3 mm in drawing
Pilot diameterØ36 mm f8
Flange mountingThree M4 threads, 6 mm deep; 120° spacing on Ø48 ±0.05 mm pitch circle
Shaft materialStainless steel
Flange materialAluminum
Housing materialAluminum die cast
Startup torque0.5 Ncm at +20 °C
Operating torque0.3 Ncm at +20 °C
Permissible shaft loading80 N radial; 40 N axial
Mechanical operating speed≤9,000 rpm; allow self-heating of 3.3 K per 1,000 rpm; usable speed also limited by pulse count and output frequency
Rotor moment of inertia6.2 gcm²
Bearing lifetime3.6 ×10¹⁰ revolutions
Angular acceleration≤500,000 rad/s²
IP ratingIP67 housing/cable-connection side; IP65 shaft side, IEC 60529
Operating temperature, stationary cable−40 to +100 °C
Operating temperature, flexible cable−30 to +100 °C
Storage temperature−40 to +100 °C, without packaging
Relative humidity90%, condensation not permitted
Shock resistance100 g, 6 ms, EN 60068-2-27
Vibration resistance30 g, 10–2,000 Hz, EN 60068-2-6
EMCEN 61000-6-2 and EN 61000-6-3
MTTFD300 years to EN ISO 13849-1; nominal component load, average ambient 40 °C, 8,760 h/year; standard product, not a safety component
ConfigurationProgrammable/configurable
Electrical zero-pulse widths90° gated with A and B; 180° gated with A or with B; 270° gated with A or B
Mechanical zero-pulse width1–359° programmable relative to one mechanical shaft revolution
Universal cable outletOutlet permits radial or axial routing without bending the cable at the connection
Cable diameter5.6 ±0.2 mm
Cable bend radius30 mm
Conductor functionsWH=A; BN=A inverted; PK=B; BK=B inverted; VT=Z; YE=Z inverted; BU=GND; RD=+Us
Physical Weight (kg)0.3

Industrial Applications

1. Tracking relative feed travel in a material-handling mechanism

A material-handling mechanism can couple the encoder to its feed drive and count A/B transitions in an external controller. Pulse count and direction provide a relative rotation reference that the controller converts to travel using calibrated machine geometry. The integration assesses receiver decoding, backlash, slip and output-frequency limits before using that reference to coordinate repeated material advances.

Problem Solved

Quadrature rotation feedback supplies external feed control with relative travel and direction information, helping coordinate material advances according to the calibrated mechanical drive arrangement.

Relative feed travel A/B quadrature External controller

2. Supplying rotational speed feedback from a driven roller

A driven roller can transfer motion through a suitable shaft coupling to the encoder’s solid shaft. An external counter derives rotational speed from pulses per revolution and elapsed time. The installation accounts for receiver input levels, shaft loading and alignment, with pulse-frequency limits and the specified self-heating allowance assessed across the intended operating speed and temperature range.

Problem Solved

A shaft-referenced pulse stream gives external speed control a rotational feedback value, helping regulate roller movement using the coupled encoder as the motion reference.

Roller-speed feedback Incremental pulses Shaft coupling

3. Adapting the index pulse to an external sequencing input

During rotary-machine commissioning, the programmable encoder can use an electrical or mechanical zero-pulse width suited to the external sequencing input. The selected TTL or HTL output level matches the intended receiver interface, with TTL provided as the factory setting. The controller evaluates the index together with A/B motion, while initialization and pulse-frequency limits remain part of the installed timing assessment.

Problem Solved

Configurable output level and index width help external sequencing receive a suitable angular-cycle reference, adapting the signal presentation to the installed controller input and machine timing.

Programmable index TTL/HTL External sequencing
Select your currency