SICK 1084850 DFS60B-S4EC08192 HTL Incremental Encoder

USD 412.88

8,192-pulse HTL/push-pull incremental encoder with six channels, 10 mm solid shaft, face-mount flange, 10–32 V supply and radial M12 eight-pin connector.

SKU SICK-1084850 Category
SICK Encoders

SICK DFS60B-S4EC08192 HTL Incremental Encoder

BrandSICK
Model IdentifierDFS60B-S4EC08192
Official Part Number1084850

Technical Overview

The SICK DFS60B-S4EC08192 is an 8,192-pulse-per-revolution incremental encoder with six-channel HTL/push-pull signaling. Its A, B and Z signals have complementary channels, with one 90° electrical reference signal logically gated with A and B. A 10 mm stainless steel solid shaft with flat and 19 mm shaft length couples rotation through a face-mount flange with three M4 fixing points. The 10–32 V device uses a radial eight-pin M12 male connector, initializes in 40 ms and supports output frequency up to 600 kHz. Aluminum construction provides IP67 housing/connector protection with the mating connector fitted and IP65 at the shaft. Operating speed must satisfy the electrical output limit and mechanical/thermal conditions.

8,192-pulse incremental encoder with six-channel HTL/push-pull signals, 10 mm solid shaft, face-mount flange and radial M12 eight-pin connection.

Key Features

  • 8,192 pulses per revolution; incremental HTL/push-pull interface
  • Six channels: A, B, Z and their complementary signals
  • One 90° electrical reference signal, logically gated with A and B
  • 10–32 V supply; 40 ms initialization; output frequency ≤600 kHz
  • Radial M12 eight-pin male connector
  • 10 mm stainless steel solid shaft with flat; 19 mm shaft length
  • Face-mount flange with three M4 fixing points
  • Aluminum flange and aluminum die-cast housing
  • IP67 housing/connector with mating connector fitted; IP65 shaft side
  • Reverse-polarity protection; output short-circuit protection for maximum 30 s

Provide high-resolution incremental rotation and reference signals through a radial M12 interface for compatible external counting and drive electronics.

Technical Specification Matrix

ParameterValue
Product typeIncremental rotary encoder
Pulses per revolution8,192; observe manufacturer maximum-revolution curve and output-frequency limit
Measuring step90° electrical / pulses per revolution
Measuring step deviation±0.008° at binary number of lines
Error limits±0.05°
Electrical interfaceHTL / push-pull
Signal channelsSix: A, complementary A, B, complementary B, Z, complementary Z
Reference signalOne; 90° electrical; logically gated with A and B
Initialization time40 ms
Output frequency≤600 kHz
Load current≤30 mA
Power consumption≤0.5 W without load
Power supply10–32 V
ConnectionM12 eight-pin male connector, radial
Pin assignment1=complementary A; 2=A; 3=complementary B; 4=B; 5=complementary Z; 6=Z; 7=GND; 8=+US
Screen connectionScreen to encoder housing; ground on control side
Protective functionsReverse-polarity protection; short circuit opposite another channel, US or GND permitted for maximum 30 s
Mechanical design10 mm solid shaft with flat; face-mount flange
Shaft length19 mm
Face mountingThree M4 holes, 6 mm deep, on Ø48 mm pitch circle
Shaft materialStainless steel
Flange materialAluminum
Housing materialAluminum die cast
Nominal housing diameter60 mm
Start-up torque0.5 Ncm at +20 °C
Operating torque0.3 Ncm at +20 °C
Permissible shaft loading80 N radial; 40 N axial
Mechanical operating speed≤9,000 rpm; allow self-heating 3.3 K per 1,000 rpm; additionally observe electrical frequency and maximum-revolution limits
Rotor moment of inertia6.2 gcm²
Bearing lifetime3.6 × 10¹⁰ revolutions
Angular acceleration≤500,000 rad/s²
IP ratingIP67 housing side and male connector with mating connector fitted; IP65 shaft side, IEC 60529
Operating temperature−40 to +100 °C with stationary cable; −30 to +100 °C with flexible cable; allow speed-dependent self-heating
Storage temperature−40 to +100 °C without packaging
Relative humidity90%; condensation not permitted
Shock resistance70 g, 6 ms, EN 60068-2-27
Vibration resistance30 g, 10–2,000 Hz, EN 60068-2-6
EMCEN 61000-6-2 and EN 61000-6-4
MTTFD300 years, EN ISO 13849-1; nominal loads, average ambient +40 °C, 8,760 h/year; all electronic failures hazardous; standard product, not a safety component
Physical Weight (kg)0.3

Industrial Applications

1. Tracking relative travel from a transport roller

A transport machine can couple the solid shaft to a suitable roller or drive shaft and count the A/B signals in external position electronics. The 8,192 pulses per revolution provide the rotational increment basis, with travel derived from roller circumference and gearing. Installed coupling and slip affect the resulting travel reference, while the controller uses compatible HTL/push-pull inputs.

Problem Solved

Incremental shaft counts give external position electronics a relative transport-travel reference, helping coordinate material movement against the measured rotation of the coupled mechanism.

Relative travel 8,192 pulses HTL signals

2. Deriving shaft speed for drive monitoring

A compatible counter or drive can measure incremental pulse rate and calculate shaft speed. The six-channel HTL/push-pull interface connects rotation to the external electronics through a radial M12 connector. Integration assesses both the 600 kHz electrical output limit and mechanical speed restrictions, including speed-dependent self-heating at the selected ambient temperature.

Problem Solved

Pulse-rate feedback provides external drive monitoring with a measured rotation-rate reference, helping compare actual shaft motion with the commanded operating speed during machine operation.

Speed monitoring 600 kHz limit Radial M12

3. Referencing a repeated rotary machine cycle

A cyclic machine can use the Z signal to identify one reference position per revolution after establishing its machine reference. The 90° electrical reference is logically gated with A and B, allowing compatible counting electronics to associate it with the incremental sequence. The encoder supplies relative rotational information rather than a retained multi-turn absolute position.

Problem Solved

A reference event within each revolution gives external cycle logic an index for aligning repeated motion and associating incremental counts with the established machine reference.

Rotary index Reference Z Cycle alignment
Select your currency