SICK 1071209 IME08-06NPOZT0S M8 PNP NC Inductive Sensor

USD 79.82

Non-flush M8 inductive sensor with 6 mm nominal range, 4.86 mm assured range, PNP normally-closed output, 500 Hz and an M8 three-pin connector.

SKU SICK-1071209 Category
SICK IME

SICK IME08-06NPOZT0S M8 PNP NC Inductive Sensor

BrandSICK
Model IdentifierIME08-06NPOZT0S
Official Part Number1071209

Technical Overview

The SICK IME08-06NPOZT0S is a standard-design M8 ×1 inductive proximity sensor with triple sensing range and non-flush installation. Nominal sensing range is 6 mm and assured range is 4.86 mm, with documented reduction factors for different metals. A PNP normally-closed output supplies a switching condition to external machine logic at up to 500 Hz. The 10–30 V DC sensor has an M8 three-pin connector, a nickel-plated brass housing and a PA 66 sensing face. IP67 protection, short-circuit and power-up pulse protection, and −25 to +75 °C operation support machine integration. Two nickel-plated brass mounting nuts are supplied; maximum tightening torque is 5 Nm.

Non-flush M8 inductive sensor with 6 mm nominal range, 4.86 mm assured range, PNP normally-closed output and M8 three-pin connection.

Key Features

  • Standard-design M8 ×1 inductive sensor; non-flush installation
  • Triple sensing range: 6 mm nominal, 4.86 mm assured
  • PNP normally-closed output; DC three-wire design
  • 500 Hz switching frequency
  • M8 three-pin connector; NC signal on pin 4
  • 10–30 V DC; ≤200 mA continuous current; ≤10 mA no-load current
  • Short-circuit protection and power-up pulse protection
  • Nickel-plated brass housing; PA 66 sensing face; IP67 to EN 60529
  • 50 mm housing length; 30 mm thread length; two mounting nuts supplied
  • −25 to +75 °C operating and storage temperature

Detect a nearby metal target with 6 mm nominal inductive range and a PNP normally-closed signal while preserving the documented non-flush mounting clearances.

Technical Specification Matrix

ParameterValue
Functional principleInductive proximity detection
Housing designMetric, standard design
Mounting threadM8 ×1
Body diameter8 mm
InstallationNon-flush
Special featureTriple sensing range
Nominal sensing range Sn6 mm
Assured sensing range Sa4.86 mm
Digital outputPNP normally closed; DC three-wire
Switching frequency500 Hz
ConnectionM8 three-pin male connector
Pin assignment1 BN=brown L+; 4 BK=black NC output; 3 BU=blue M (CD-004)
Power supply10–30 V DC
Ripple≤10%
Voltage drop≤2 V at maximum output current
Time delay before availability≤50 ms
Hysteresis1–15%
Reproducibility≤5% of Sr at constant supply voltage and ambient temperature
Temperature drift±10% of Sr
EMCEN 60947-5-2
Continuous current≤200 mA
No-load current≤10 mA
Circuit protectionShort-circuit and power-up pulse protection
Shock resistance30 g, 11 ms
Vibration resistance10–55 Hz, 1 mm
Operating temperature−25 to +75 °C
Storage temperature−25 to +75 °C
Housing materialNickel-plated brass
Sensing facePA 66 plastic
Housing length50 mm
Thread length30 mm
Maximum tightening torque≤5 Nm
Items suppliedTwo nickel-plated brass mounting nuts
Mounting nut size13 across flats, as labeled in the drawing
IP ratingIP67 to EN 60529
UL fileNRKH.E181493
MTTFD1,735 years
DCavg0%
Metal reduction factorsReference values, may vary: St37 steel 1; V2A/304 stainless steel approximately 0.68; aluminum approximately 0.45; copper approximately 0.39; brass approximately 0.49
Installation clearancesA=16 mm; B=30 mm; C=8 mm; D=18 mm; E=10 mm; F=60 mm, using manufacturer non-flush installation diagram

Industrial Applications

1. Confirming a metal slide at a repeatable end position

A positioning slide can carry a metal target past the non-flush sensing face at its intended end position. The external sequence reads the PNP normally-closed condition and applies the required logic for target arrival. Mounting preserves the documented clearance geometry, while the actual target material and seated gap are evaluated against the nominal and assured ranges and reduction factors.

Problem Solved

A repeatable inductive reference helps external sequencing logic distinguish the slide’s target position from travel between positions without requiring physical contact with the moving mechanism.

Slide position Non-flush mounting PNP NC

2. Counting separated metal tabs on an indexing wheel

An indexing wheel can present separated metal tabs to the sensor as it rotates. Each tab changes the normally-closed PNP condition, and an external counter records transitions after verifying tab spacing, target gap and motion timing against the 500 Hz rating. Inductive sensing responds to the metal features, with material-specific range reduction included in the installation assessment.

Problem Solved

Successive metal-tab transitions provide external counting logic with index events, helping track repeated mechanical features without using an optical contrast mark on each tab.

Index counting 500 Hz Metal tabs

3. Checking a metal insert inside a nonmetallic carrier

An assembly carrier made from nonmetallic material can present a metal insert at a controlled gap facing the sensor. Inductive detection responds to the insert, and external inspection logic evaluates the PNP normally-closed state when the carrier is stationary. Setup uses representative inserts and preserves non-flush clearances, taking the insert metal’s documented reduction factor into account.

Problem Solved

A metal-specific presence reference helps external inspection logic identify an empty insert location within a nonmetallic carrier before the assembly advances to the next operation.

Insert inspection Inductive detection Material factors
Select your currency