1. Confirming a metal clamp at its seated position
A fixture can present a metal clamp target to the flush sensing face when the clamp reaches its seated position. External sequencing logic reads the PNP normally-open state as a position condition. The commissioned gap accounts for the 4.05 mm assured range and target-material reduction factors, while flush installation places the sensing face alongside the surrounding metal mounting surface.
Problem Solved
A seated metal-target condition helps external sequencing logic distinguish the intended clamp position from an open presentation, providing contactless position feedback at the fixture.
Clamp position
Flush M18
PNP normally open
2. Counting separated metal features on a rotating mechanism
A rotating mechanism can carry separated metal tabs past the fixed inductive sensing face and route PNP transitions to an external counter. The 1,000 Hz switching rating defines the sensor frequency basis. Installation preserves the documented clearances, and commissioning checks actual tab material, face coverage, gap and separation so that successive features produce distinct target-present and target-absent intervals.
Problem Solved
Distinct inductive transitions give external counting logic a reference for passing metal features, helping track mechanism cycles without optical dependence on the target color.
Metal-feature counting
1,000 Hz
Inductive transitions
3. Checking a metal insert in an assembly pocket
An assembly pocket can present a metal insert close to the sensing face while an empty pocket leaves the immediate detection area clear. External inspection logic samples the normally-open output after loading settles. Commissioning uses representative inserts and the material reduction factors, with the 5 mm nominal and 4.05 mm assured ranges distinguished when setting the repeatable inspection gap.
Problem Solved
A local metal-present condition helps external inspection logic identify an omitted insert before the next assembly step, using inductive sensing at the expected pocket location.
Insert inspection
Metal presence
Material factors