1. Confirming that a metal clamp reaches its seated position
A fixture can present a metal clamp target to the flush sensing face when the clamp reaches its seated position. External sequencing reads the normally-open PNP state before permitting the next operation. Mechanical setup establishes a suitable gap using the 10 mm nominal and 8.1 mm assured ranges, while accounting for the actual metal’s reduction factor and the specified flush-installation clearances.
Problem Solved
An inductive seated-position event gives external sequencing evidence that the metal target has reached the observation point, helping coordinate the next fixture operation without a contact switch.
Clamp position
Flush M30
PNP NO
2. Counting separated metal features on a moving mechanism
A moving mechanism can pass separated metal flags or features across the sensing face and send PNP transitions to an external counter. The 500 Hz rating provides the sensor timing basis for the selected feature spacing and movement speed. Setup verifies the actual metal, sensing gap and controller input response so successive features produce separate normally-open switching events.
Problem Solved
Repeated inductive transitions give an external counter feature-passage events, helping track movement cycles or separated metal items without mechanically contacting the moving target.
Metal-feature count
500 Hz
Noncontact events
3. Checking that a metal carrier leaves a transfer point
A transfer point can place the sensor beside a metal carrier target at its stopped position. External sequencing checks the normally-open output before release and again after the movement command. A target that remains within the inductive observation gap retains the detected condition, allowing external timing logic to flag a carrier that has not cleared the station.
Problem Solved
A before-and-after metal-presence condition gives external transfer logic evidence of carrier departure, helping identify a retained load before another carrier enters the same position.
Carrier departure
Metal presence
Transfer sequence