SICK 1041030 IME30-15BPSZC0S M30 PNP NO Inductive Sensor

USD 33.80

Flush M30 inductive sensor with 15 mm nominal range, 12.15 mm assured range, PNP normally-open output, 500 Hz and an M12 four-pin connector.

SKU SICK-1041030 Category
SICK IME

SICK IME30-15BPSZC0S M30 PNP NO Inductive Sensor

BrandSICK
Model IdentifierIME30-15BPSZC0S
Official Part Number1041030

Technical Overview

The SICK IME30-15BPSZC0S is a standard-design M30 ×1.5 inductive proximity sensor for flush installation. It provides 15 mm nominal and 12.15 mm assured sensing range, with reference reduction factors for different metals. Its PNP normally-open output switches at up to 500 Hz and supports continuous current up to 200 mA. The 10–30 V DC device uses an M12 four-pin connector and provides short-circuit and power-up pulse protection. A nickel-plated brass housing and PA 66 sensing face provide IP67 protection, with operation from −25 to +75 °C. Two nickel-plated brass mounting nuts are supplied, and maximum tightening torque is 100 Nm.

Flush M30 inductive sensor with 15 mm nominal range, 12.15 mm assured range, PNP normally-open output and M12 four-pin connection.

Key Features

  • Standard-design M30 ×1.5 inductive sensor; flush installation
  • 15 mm nominal range; 12.15 mm assured range
  • PNP normally-open output; DC three-wire design
  • 500 Hz switching frequency; ≤200 mA continuous current
  • M12 four-pin male connector; output on pin 4, pin 2 not connected
  • 10–30 V DC; ≤10 mA no-load current; ≤2 V drop at maximum load
  • ≤125 ms time delay before availability; short-circuit and power-up pulse protection
  • Nickel-plated brass housing; PA 66 sensing face; IP67
  • 71 mm housing length, 54 mm thread and two 36 mm-across-flats mounting nuts
  • −25 to +75 °C operation; maximum tightening torque 100 Nm

Detect nearby metal targets from a flush sensing face and provide a PNP normally-open condition for external position, counting or assembly logic.

Technical Specification Matrix

ParameterValue
Functional principleInductive proximity detection
Housing designMetric, standard design
Mounting threadM30 ×1.5
Body diameter30 mm
InstallationFlush
Nominal sensing range Sn15 mm
Assured sensing range Sa12.15 mm
Digital outputPNP normally open; DC three-wire
Switching frequency500 Hz
ConnectionM12 four-pin male connector
Pin assignment1 BN=brown L+; 4 BK=black NO output; 2=not connected; 3 BU=blue M (CD-007)
Power supply10–30 V DC
Ripple≤10%
Voltage drop≤2 V at maximum output current
Time delay before availability≤125 ms
Hysteresis3–15%
Reproducibility≤2% of Sr at constant supply voltage and ambient temperature
Temperature drift±10% of Sr
EMCEN 60947-5-2
Continuous current≤200 mA
No-load current≤10 mA
Circuit protectionShort-circuit and power-up pulse protection
Shock resistance30 g, 11 ms
Vibration resistance10–55 Hz, 1 mm
Operating temperature−25 to +75 °C
Housing materialNickel-plated brass
Sensing facePA 66 plastic
Housing length71 mm including integral connector
Thread length54 mm
Maximum tightening torque≤100 Nm
Items suppliedTwo nickel-plated brass mounting nuts
Mounting nuts36 mm across flats
IP ratingIP67 to EN 60529
UL fileNRKH.E181493
MTTFD1,735 years
DCavg0%
Metal reduction factorsReference values, may vary: St37 steel 1; V2A/304 stainless steel approximately 0.8; aluminum approximately 0.45; copper approximately 0.4; brass approximately 0.4
Installation clearancesB=60 mm; C=30 mm; D=45 mm; F=120 mm, using manufacturer flush-installation diagram

Industrial Applications

1. Confirming a metal slide at a repeatable end position

A positioning slide can carry a metal target past the flush sensing face at its intended end position. The external sequence reads the PNP normally-open condition and applies the required logic for target arrival. Mounting preserves the documented clearance geometry, while the actual target material and seated gap are evaluated against the nominal and assured ranges and reduction factors.

Problem Solved

A repeatable inductive reference helps external sequencing logic distinguish the slide’s target position from travel between positions without requiring physical contact with the moving mechanism.

Slide position Flush mounting PNP NO

2. Counting separated metal tabs on an indexing wheel

An indexing wheel can present separated metal tabs to the sensor as it rotates. Each tab changes the normally-open PNP condition, and an external counter records transitions after verifying tab spacing, target gap and motion timing against the 500 Hz rating. Inductive sensing responds to the metal features, with material-specific range reduction included in the installation assessment.

Problem Solved

Successive metal-tab transitions provide external counting logic with index events, helping track repeated mechanical features without using an optical contrast mark on each tab.

Index counting 500 Hz Metal tabs

3. Checking a metal insert inside a nonmetallic carrier

An assembly carrier made from nonmetallic material can present a metal insert at a controlled gap facing the sensor. Inductive detection responds to the insert, and external inspection logic evaluates the PNP normally-open state when the carrier is stationary. Setup uses representative inserts and preserves flush clearances, taking the insert metal’s documented reduction factor into account.

Problem Solved

A metal-specific presence reference helps external inspection logic identify an empty insert location within a nonmetallic carrier before the assembly advances to the next operation.

Insert inspection Inductive detection Material factors
Select your currency