Sale!

Festo 553744 Position Transmitter, 0–10 V, T-Slot, M8

Original price was: USD 121.94.Current price is: USD 105.56.

Magnetic Hall position sensing up to 52 mm depending on drive, 0.02 mm resolution, 0.2 mm repeatability, 0.3 m PUR cable and four-pin M8 plug.

SKU Festo-553744 Category
Festo Position Sensors

Festo SMAT-8M-U-E-0,3-M8D Position Transmitter

BrandFesto
Model IdentifierSMAT-8M-U-E-0,3-M8D
Official Part Number553744

Technical Overview

The Festo SMAT-8M-U-E-0,3-M8D senses the piston position of compatible magnetically detectable drives using the Hall principle. Its displacement-proportional 0–10 V output connects to an analogue controller input over a sensing range up to 52 mm, depending on the drive. Displacement resolution is 0.02 mm, repetition accuracy is 0.2 mm and typical linearity error is ±1 mm. The transmitter inserts into a T-slot from above and clamps by screw. A 0.3 m PUR-sheathed cable terminates in a four-pin A-coded M8 plug, with 15–30 V DC operation and IP65/IP68 protection. The 9.5 g assembly samples typically every 2 ms.

T-slot magnetic Hall position transmitter with 0–10 V output, up to 52 mm sensing range depending on drive and 0.3 m M8 cable.

Key Features

  • Contactless magnetic Hall piston-position sensing
  • Up to 52 mm sensing range, depending on compatible drive
  • Displacement-proportional 0–10 V analogue output
  • 0.02 mm displacement resolution; 0.2 mm repetition accuracy
  • ±1 mm typical linearity error
  • 2 ms typical sampling interval and 3 m/s maximum travel speed
  • 15–30 V DC operation with reverse-polarity protection
  • 0.3 m PUR-sheathed cable and four-pin A-coded M8x1 plug
  • Screw-clamped T-slot installation from above; 9.5 g product weight
  • IP65/IP68; −40 to 80 °C ambient, −20 to 70 °C with moving cable

Feed continuous piston-position information to an analogue PLC input with a T-slot Hall transmitter and displacement-proportional 0–10 V output.

Technical Specification Matrix

ParameterValue
DesignFor T-slot
ApprovalRCM; c UL us - Listed (Oil)
CE mark (see declaration of conformity)To EU EMC Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions
Certificate issuing authorityUL E232949
Note on materialsRoHS compliant; Free of halogen
Instructions on usehttps://www.festo.com/Drive-Sensor-Overview
Measured variablePosition
Measuring principleMagnetic Hall
Sensing rangeUp to 52 mm, depending on the drive used
Ambient temperature-40 °C...80 °C
Typical sampling interval2 ms
Max. travel speed3 m/s
Displacement resolution0.02 mm
Repetition accuracy0.2 mm
Analogue output0 - 10 V
Typical linearity error±1 mm
Short circuit current ratingYes
Overload protectionAvailable
Output signalAnalogue
Operational voltage range DC15 V...30 V
Residual ripple10%
No-load supply current12 mA
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typeCable with plug
Electrical connection 1, connector systemM8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores4
Electrical connection 1, type of mountingScrew-type lock; Rotatable
Electrical connection 1, compatible type of mountingCompatible with rotatable/non-rotatable screw-type lock
Connection outlet orientationIn-line
Material electrical contactGold-plated copper alloy
Material screw-type lockBrass, nickel-plated
Test conditions cableBending strength: to Festo standard; Torsional strength: > 300,000 cycles, ±270°/0.1 m; Energy chain: > 5 million cycles, bending radius 28 mm
Cable length0.3 m
Cable characteristicSuitable for energy chains/robot applications
Cable sheath colourGrey
Material cable sheathTPE-U(PUR)
Type of mountingScrew-clamped; Insertable in the slot from above
Mounting positionAny
Physical Weight (kg)0.0095
Material housingReinforced PA; High-alloy stainless steel
Status indicationRed, green LED
Ambient temperature with moving cable-20 °C...70 °C
Degree of protectionIP65; IP68
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Element installed statically, no meaningful evaluation possible according; to ISO 14644-1

Industrial Applications

1. Gripper Opening Measurement for Part Classification

A handling station distinguishes components by the opening position of a compatible magnetic gripper. The transmitter supplies a displacement-proportional 0–10 V signal to the controller, allowing jaw-related piston positions to be compared during the gripping sequence. Its 0.2 mm repetition accuracy and ±1 mm typical linearity error characterize the sensing component; the gripper mechanism determines the relationship between piston position and finger spacing.

Problem Solved

Continuous position information lets the controller distinguish gripping positions rather than receiving only an endpoint signal, supporting classification of parts with sufficiently separated jaw openings.

0–10 V analogue 0.2 mm repeatability Magnetic Hall

2. Short-Stroke Motion Trace Recording

A machine records the movement of a compatible short-stroke pneumatic cylinder to examine its progress during a cycle. The Hall transmitter observes piston position without mechanical contact and samples typically every 2 ms. Within the drive-dependent measuring range of up to 52 mm, the analogue signal provides intermediate position information for recording travel behavior through the controller’s analogue acquisition channel.

Problem Solved

Intermediate position samples reveal how the piston progresses through its stroke, providing motion information for cycle analysis beyond separate extended and retracted indications.

2 ms typical sampling Up to 52 mm Contactless position

3. Fixture Travel-Window Monitoring

An assembly fixture must determine whether a compatible magnetic actuator reaches the expected travel window after engaging a component. The transmitter measures intermediate piston position through its T-slot mounting interface and provides a 0–10 V output. Controller-defined position windows can represent the expected engagement travel, with the specified 0.02 mm resolution and 0.2 mm repetition accuracy characterizing the sensing data.

Problem Solved

Analogue travel feedback allows the sequence controller to compare engagement position with the expected window, identifying an unexpected fixture travel result before the next operation.

Intermediate position T-slot mounting 0–10 V
Select your currency