Sale!

Festo 2393548 Rotary Position Sensor, 270°, PNP/NPN, M8

Original price was: USD 238.16.Current price is: USD 204.88.

Hall sensor for DRVS-25 with two teachable binary switching points, selectable NO/NC, ≤1° repetition accuracy and 0.3 m four-pin M8 cable.

SKU Festo-2393548 Category
Festo Position Sensors

Festo SRBS-Q12-25-E270-EP-1-S-M8 Rotary Position Sensor

BrandFesto
Model IdentifierSRBS-Q12-25-E270-EP-1-S-M8
Official Part Number2393548

Technical Overview

The Festo SRBS-Q12-25-E270-EP-1-S-M8 is a magnetic Hall position sensor for shaft-rotation detection on the DRVS-25 rotary drive. It provides two teachable binary switching points over a 270° sensing range, with selectable PNP or NPN outputs and normally open or normally closed functions. Switching-point repetition accuracy is ≤1°, with 4 ms switch-on/off times and a 125 Hz maximum frequency. The sensor operates at 10–30 V DC and connects through a 0.3 m PUR cable with a four-pin A-coded M8 plug. The 60 g oil-resistant, screw-clamped assembly has IP65/IP68 protection and a −20 to 70 °C ambient range.

DRVS-25 Hall rotary-position sensor with two teachable binary outputs, selectable PNP/NPN and NO/NC, and a 0.3 m M8 cable.

Key Features

  • Magnetic Hall shaft-rotation sensing for DRVS-25
  • 270° sensing range
  • Two binary switching points with pushbutton teach-in
  • Selectable two PNP or two NPN outputs
  • Normally open or normally closed function selectable
  • ≤1° switching-point repetition accuracy
  • 4 ms on/off component times; 125 Hz maximum switching frequency
  • 10–30 V DC operation and 50 mA maximum output current
  • 0.3 m PUR cable and four-pin A-coded M8x1 plug
  • 60 g oil-resistant assembly with IP65/IP68 protection

Teach two shaft-angle switching points on a DRVS-25 drive in one sensor, with selectable PNP/NPN and NO/NC output functions.

Technical Specification Matrix

ParameterValue
DesignRound
Based on standardEN 60947-5-2
ApprovalRCM; c UL us - Listed (Oil)
CE mark (see declaration of conformity)To EU EMC Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions
Special characteristicsOil-resistant
Note on materialsRoHS compliant; Free of halogen
Measured variableRotation angle
Measuring principleMagnetic Hall
Sensing range270 deg
Ambient temperature-20 °C...70 °C
Typical sampling interval3 ms
Switching output2 x PNP or 2 x NPN, switchable
Switching element functionNC or NO, switchable
Repetition accuracy of switching point<= 1°
Switch-on time4 ms
Switch-off time4 ms
Max. switching frequency125 Hz
Max. output current50 mA
Max. switching capacity DC1.5 W
Voltage drop1 V
Off-state current0.05 mA
Short circuit current ratingYes
Overload protectionYes
Rated operational voltage DC24 V
Operational voltage range DC10 V...30 V
Residual ripple10%
No-load supply current20 mA
Reverse polarity protectionFor all electrical connections
Electrical connection 1, connection typeCable with plug
Electrical connection 1, connector systemM8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores4
Electrical connection 1, type of mountingScrew-type lock; Rotatable
Electrical connection 1, compatible type of mountingCompatible with rotatable/non-rotatable screw-type lock
Connection outlet orientationIn-line
Material electrical contactGold-plated copper alloy
Test conditions cableBending strength: to Festo standard; Torsional strength: > 300,000 cycles, ±270°/0.1 m; Energy chain: > 5 million cycles, bending radius 28 mm
Cable length0.3 m
Cable characteristicSuitable for energy chains/robot applications
Cable sheath colourGrey
Material cable sheathTPE-U(PUR)
Cable diameter2.9 mm
Type of mountingScrew-clamped
Mounting positionAny
Physical Weight (kg)0.06
Housing colourBlack
Material housingReinforced PA; Polyester
Material foilPolyester
Switching status indicationYellow LED
Setting optionsPushbutton teach-in
Storage temperature-30 °C...70 °C
Ambient temperature with moving cable-20 °C...70 °C
Degree of protectionIP65; IP68
Protection classIII
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Vibration resistanceTransport application test with severity level 3 in accordance with FN; 942017-4 and EN 60068-2-6
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesMetals with more than 5% by mass of copper, zinc or nickel are excluded; from use. Exceptions are nickel in steel, chemically nickel-plated; surfaces, printed circuit boards, cables, electrical plug connectors and; coils.
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
Manufacturer-listed drive allocationDRVS-25
Number of binary switching points2

Industrial Applications

1. Working and Clearance Position Feedback for a Swing Tool

A swing-tool mechanism driven by a DRVS-25 must report its working and clearance positions to the sequence controller. The sensor detects shaft rotation magnetically and stores two switching points through pushbutton teach-in. Both points are available from one device through the four-pin M8 connection, with selectable PNP/NPN and NO/NC functions for the ordinary control-input arrangement.

Problem Solved

Two teachable angle events provide working-position and clearance feedback from one shaft sensor, allowing the controller to sequence the tool movement using observed rotary positions.

Two switching points Pushbutton teach-in DRVS-25

2. Rotary Cycle Event Logging on a Test Fixture

A test fixture repeatedly swivels a DRVS-25 drive and records arrivals at two selected shaft angles. The sensor’s binary outputs provide events for timestamping those arrivals, with switching-point repetition accuracy of ≤1°. Specified 4 ms on/off component times and a 125 Hz maximum switching frequency characterize the sensor response within the complete test and acquisition system.

Problem Solved

Repeatable shaft-angle switching supplies identifiable arrival events for cycle records, giving the test controller observations of rotary movement instead of relying solely on timed actuator commands.

≤1° repetition 4 ms on/off 125 Hz maximum

3. Rotary Position Feedback on a Moving Handling Head

A handling head carries a DRVS-25 rotary mechanism while the sensor lead flexes with the larger machine motion. This version supplies a 0.3 m PUR lead with a four-pin M8 plug and energy-chain suitability. The manufacturer documents over five million cable test cycles at 28 mm bending radius, with a −20 to 70 °C moving-cable temperature range.

Problem Solved

The documented flexible lead and compact plug support rotary-position feedback on a moving assembly, addressing the wiring-motion requirement alongside the shaft-angle switching function.

0.3 m PUR lead Energy-chain test data Four-pin M8
Select your currency