1. Adding safety I/O to a configured machine system
A compatible Flexi Classic system can use the expansion module to connect additional safety inputs and provide the corresponding configured safety outputs. Rotary switches establish the intended function, while the complete system design selects compatible devices, wiring and required main-module arrangement. Commissioning validates input behavior, output response and fault handling against the machine risk assessment and required safety performance.
Problem Solved
Additional safety I/O helps the machine designer incorporate more monitored devices into a compatible control arrangement, with achieved safety performance established through the complete validated system.
Safety I/O expansion
Rotary configuration
System validation
2. Coordinating delayed outputs in a stopping sequence
A machine stopping sequence can assign the Q3/Q4 outputs a delay within the specified 0–5 s range when that behavior is required by the validated safety design. The configured Flexi Classic system evaluates its inputs and controls the connected output devices. Commissioning checks the actual delay, external device monitoring, stopping behavior and restart conditions with the installed equipment.
Problem Solved
Configurable delayed outputs help implement an engineered stopping sequence, while the selected timing and external device behavior are verified against the complete machine safety requirement.
Delayed outputs
Stopping sequence
External device monitoring
3. Evaluating a material-transfer muting configuration
A material-transfer application can use the module’s muting function within a compatible configured Flexi Classic system, with the documented zero-or-two muting-sensor arrangement selected for the design. The system designer establishes sensor placement, signal evaluation and the permitted transfer condition. Commissioning validates the resulting behavior, including foreseeable access conditions and restoration of the protective function, for the complete machine installation.
Problem Solved
Available muting functionality gives the designer a basis for controlled material-transfer logic, with sensor arrangement and protective behavior established by the validated application rather than the module alone.
Muting configuration
Material transfer
Application validation