1. Metered Travel of a Pneumatic Slide
A pneumatic slide needs a controlled working stroke rather than unrestricted exhaust discharge. Installed in a suitable actuator exhaust path, this valve provides an adjustable restriction through its manual rotary knob. The M5 thread and QS-6 tube interface fit the corresponding circuit connections, and the documented 105 l/min standard nominal controlled flow characterizes the selected valve size.
Problem Solved
Adjustable exhaust restriction gives the machine builder a local means of setting pneumatic travel behavior, while the latching knob retains the chosen mechanical adjustment.
Exhaust-air metering
105 l/min nominal
Latching knob
2. Directional Speed Setting for a Fixture Actuator
A double-acting fixture actuator can need different movement behavior when engaging and withdrawing. A one-way exhaust flow control provides directional restriction at the selected connection rather than imposing the same restriction on both flow directions. This variant combines manually adjustable exhaust metering with published controlled-direction and blocked-direction nominal flow ratings, supporting a circuit with separately set directional motion.
Problem Solved
The one-way function permits directional pneumatic adjustment, helping a fixture circuit tune the selected exhaust stroke without treating both flow directions as an identical restriction.
One-way function
Manual adjustment
0.2–10 bar
3. Exhaust Adjustment in Battery Production Equipment
A battery-production machine needs local exhaust-air adjustment using components with documented material suitability for the process environment. This F1A version is specifically listed as suitable for Li-ion battery production with reduced Cu/Zn/Ni values. Its 3.3 g screw-in assembly combines an M5 thread, QS-6 tube connection and latching rotary adjustment, with Class 4 cleanroom suitability also recorded under the stated ISO measurement method.
Problem Solved
The F1A material characteristic provides a manufacturer-backed basis for exhaust-control component selection in battery production, while the latching adjustment supplies the required local pneumatic restriction.
F1A battery suitability
Reduced Cu/Zn/Ni
3.3 g