SICK 6013653 VL18-3P3940 Radial M18 PNP Retro-reflective Sensor

USD 125.06

VL18-3P3940 offers radial polarized red-light sensing, 0.05–3 m range with C110A, 270° sensitivity adjustment, fixed PNP dark switching and M12 connection.

SKU SICK-6013653 Category
SICK V18

SICK VL18-3P3940 Radial M18 PNP Retro-reflective Sensor

BrandSICK
Model IdentifierVL18-3P3940
Official Part Number6013653

Technical Overview

The SICK VL18-3P3940 is a cylindrical M18 ×1 photoelectric retro-reflective sensor with radial optics and a polarizing filter. With the C110A reflector, sensing spans 0.05–3 m and maximum range is 0.05–3.7 m. The visible red LED produces a 150 mm spot at 3 m with approximately 2.8° dispersion. A 270° potentiometer adjusts sensitivity and the PNP output uses fixed dark switching. Response is no more than 2 ms with resistive load, with 250 Hz switching at a 1:1 light/dark ratio. The 10–30 V DC device uses an M12 four-pin male connector. Its PBT/PC housing and PMMA optics provide IP67 protection and −25 to +70 °C operation.

Radial M18 polarized retro-reflective sensor with 0.05–3 m C110A sensing, 270° sensitivity adjustment, fixed PNP dark switching and M12 four-pin connector.

Key Features

  • Polarized photoelectric retro-reflective sensing
  • Cylindrical M18 ×1 housing; radial optical axis
  • C110A: 0.05–3 m sensing; 0.05–3.7 m maximum range
  • Visible red LED; Ø150 mm spot at 3 m; approximately 2.8° dispersion
  • 270° sensitivity potentiometer
  • Fixed PNP dark-switching output; ≤100 mA
  • ≤2 ms response with resistive load; 250 Hz at 1:1 light/dark ratio
  • 10–30 V DC; 30 mA without load; M12 four-pin male connector
  • PBT/PC housing; PMMA optics; IP67
  • −25 to +70 °C operating temperature

Aim a reflected red beam across a material path from radial M18 optics and send a fixed PNP dark-switching signal to external process control.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric retro-reflective sensor with polarizing filter
Housing designCylindrical M18 ×1; radial optical axis
Sensing range0.05–3 m with C110A reflector
Maximum sensing range0.05–3.7 m with C110A reflector
Light sourceVisible red LED
Light spot sizeØ150 mm at 3 m
Angle of dispersionApproximately 2.8°
LED service lifeAverage 100,000 h at ambient +25 °C
AdjustmentSensitivity potentiometer, 270°
Switching outputPNP
Switching modeDark switching, fixed
Output current≤100 mA
Response time≤2 ms with resistive load
Switching frequency250 Hz at 1:1 light/dark ratio
Power supply10–30 V DC, limit values
Ripple±10%; remain within supply tolerances
Current consumption30 mA without load
ConnectionM12 four-pin male connector
Circuit protectionA: supply reverse-polarity protection; B: inputs and output reverse-polarity protection; C: interference suppression; D: outputs overcurrent and short-circuit protection
Protection classIII
Housing materialPBT/PC plastic
Optics materialPMMA plastic
IP ratingIP67
Operating temperature−25 to +70 °C
UL fileNMFT2.E175606
IndicatorYellow signal-strength LED
Physical Weight (kg)0.1

Industrial Applications

1. Counting separated cartons across a conveyor

A conveyor can position the radial optical face toward a reflector across the load path so separated opaque cartons interrupt the red beam. The sensitivity potentiometer establishes the installed optical condition and an external counter evaluates the fixed PNP dark-switching signal. Setup checks reflector spacing, beam coverage, carton gaps and travel speed against the sensing range, response and switching-frequency limits.

Problem Solved

A carton-passage signal gives an external counter an optical event across the conveyor, using radial sensor orientation and a reflector distance checked for the installed path.

Carton counting Radial optics Dark switching

2. Monitoring opaque web continuity at a feed point

A feed station can route an opaque web across the reflected beam between the radial sensor face and a suitable reflector. External process logic uses the fixed dark-switching PNP state as the material-present condition. Commissioning adjusts sensitivity and checks web position, lateral movement, beam coverage and the minimum reflector separation so a break in the web changes the observed signal.

Problem Solved

A material-present reference helps external process logic recognize a break in opaque feed, using interruption of a reflected beam rather than depending on light returned by the web surface.

Web continuity Beam interruption PNP interface

3. Checking transfer-path occupancy at a stop

A transfer stop can position the sensor so its radial red beam crosses the expected opaque carrier position and returns from a reflector. External sequencing logic samples the fixed PNP dark-switching state after the carrier settles. Installation checks the reflector distance, alignment, carrier coverage and potential gaps through the carrier that could leave part of the optical path clear.

Problem Solved

A carrier-occupancy reference helps external sequencing logic coordinate a transfer step, using a defined beam interruption checked at the actual stopped position and radial mounting orientation.

Transfer occupancy Radial mounting Fixed PNP
Select your currency