Sale!

Festo 533345 5/3 Closed-Centre Valve, 10 mm, 24 V DC

Original price was: USD 87.10.Current price is: USD 75.66.

MPA 5/3 closed-centre valve with mechanical spring reset, 320 l/min nominal flow, 3–8 bar pilot pressure, signal indication and IP65 protection.

SKU Festo-533345 Category
Festo Solenoid Valves

Festo VMPA1-M1H-G-PI Solenoid Valve

BrandFesto
Model IdentifierVMPA1-M1H-G-PI
Official Part Number533345

Technical Overview

The Festo VMPA1-M1H-G-PI is a 10 mm, 5/3-way solenoid valve with a closed centre position and mechanical spring reset. Its soft-sealing piston-gate construction supports reversible flow and documented vacuum suitability across a −0.9 to 10 bar working range. Standard nominal flow is 320 l/min, also specified with a QS-6 arrangement, while a separate 3–8 bar pilot-pressure range governs actuation. At 24 V DC, component timings are 10 ms on, 35 ms off and 15 ms reversal. The 56 g die-cast aluminium valve has NBR seals, IP65 protection, signal indication and detenting/non-detenting override, with through-hole mounting.

10 mm 5/3 closed-centre valve with mechanical spring reset, 320 l/min nominal flow, 24 V DC actuation and separate 3–8 bar pilot requirement.

Key Features

  • 5/3-way closed-centre function with mechanical spring reset
  • 10 mm valve size and soft-sealed piston-gate design
  • 320 l/min standard nominal flow, also specified with QS-6 arrangement
  • 24 V DC operation with ±25% permissible voltage variation
  • −0.9 to 10 bar working range and separate 3–8 bar pilot pressure
  • Reversible flow direction and documented vacuum suitability
  • 10 ms switch-on, 35 ms switch-off and 15 ms reversal times
  • Signal indication and detenting/non-detenting manual override
  • IP65 protection; 0.25 Nm maximum valve-mounting torque
  • 56 g die-cast aluminium body with NBR seals; −5 to 50 °C ambient/media range

Provide directional switching and a closed centre position in one 10 mm MPA valve with mechanical spring reset.

Technical Specification Matrix

ParameterValue
Valve function5/3-way, closed
Type of actuationElectrical
Valve size10 mm
Standard nominal flow rate (standardised to DIN 1343)320 l/min
Operating voltage24 V DC
Operating pressure-0.09 MPa...1 MPa; -0.9 bar...10 bar
DesignPiston gate valve
Type of resetMechanical spring
Approvalc UL us - Recognised (Oil)
Degree of protectionIP65; To IEC 60529
Sealing principleSoft
Mounting positionAny
Manual overrideDetenting; Non-detenting
Type of pilotingPiloted
Flow directionReversible
lapOverlap
Signal status displayYes
Pilot pressure0.3 MPa...0.8 MPa; 3 bar...8 bar
Suitability for vacuumYes
Standard nominal flow rate with QS-6320 l/min
Switching time off35 ms
Switching time on10 ms
Switching time reversal15 ms
Max. positive test pulse with 0 signal400 µs
Max. negative test pulse with 1 signal200 µs
Permissible voltage fluctuations+/-25%
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN; 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Storage temperature-20 °C...40 °C
Media temperature-5 °C...50 °C
Relative air humidityMax. 90% at 40 °C
Ambient temperature-5 °C...50 °C
Max. tightening torque for valve mounting0.25 Nm
Physical Weight (kg)0.056
Type of mountingWith through-hole
Note on materialsRoHS compliant
Material sealsNBR
Material housingDie-cast aluminium

Industrial Applications

1. Direction Control for a Double-Acting Transfer Cylinder

A transfer fixture needs to drive a double-acting cylinder in either direction and select a closed centre routing state between commands. The 5/3-way valve provides that three-position arrangement with mechanical spring reset. Its 320 l/min nominal flow and separate 3–8 bar pilot requirement define the component conditions; leakage, cylinder load and the complete circuit still determine actual position retention.

Problem Solved

Three-position routing closes the working paths in the centre state, giving the circuit a defined intermediate valve condition between its two directional commands without promising leak-free load holding.

5/3 closed centre Mechanical spring reset 320 l/min nominal

2. Vacuum-Circuit Path Switching

A handling circuit needs a directional valve whose working paths can operate below atmospheric pressure. This model is explicitly suitable for vacuum and permits working pressure down to −0.9 bar with reversible flow. A separate 3–8 bar pilot requirement supplies the actuation condition while the working circuit follows the selected vacuum and venting connections.

Problem Solved

Documented vacuum suitability permits switching of sub-atmospheric working paths, while the separate pilot-pressure range defines the positive-pressure actuation needed for that vacuum circuit arrangement.

Vacuum suitability −0.9 bar 3–8 bar pilot

3. Valve-Station Commissioning

During assembly of a pneumatic valve station, technicians need to exercise routing states and correlate electrical commands with the installed valve. The detenting and non-detenting manual override provides local actuation, while signal indication makes the commanded condition visible. The 10 mm valve uses through-hole mounting with a specified 0.25 Nm maximum valve-mounting torque for installation.

Problem Solved

Manual actuation and visible signal indication support local routing checks during commissioning, helping technicians relate the electrical command to the selected pneumatic path at the valve station.

Manual override Signal indication 10 mm
Select your currency