Sale!

Festo 549057 Regulator Plate, Port 4, 2–6 bar, 21 mm

Original price was: USD 136.50.Current price is: USD 117.78.

Vertical-stack pressure regulator with secondary exhausting, manifold sub-base mounting, optional pressure-gauge connection and IP65 protection.

SKU Festo-549057 Category
Festo Regulator Plates

Festo VMPA2-B8-R3C2-C-06 Regulator Plate

BrandFesto
Model IdentifierVMPA2-B8-R3C2-C-06
Official Part Number549057

Technical Overview

The Festo VMPA2-B8-R3C2-C-06 is a 21 mm-wide regulator plate that provides pressure regulation for working port 4 within a vertical pneumatic stack. Its 2–6 bar regulation range and constant-output-pressure function support setting the downstream circuit pressure, with secondary exhausting to relieve the regulated side. The specified inlet-pressure range is 0.5–10 bar. The plate mounts on a manifold sub-base and provides a retaining-clamp pressure-gauge connection, with gauge selection possible. PA regulator housing and control components, NBR seals and IP65 protection form a 180 g unit for −5 to +50 °C ambient conditions in any mounting position.

21 mm vertical-stack regulator plate for port 4 with 2–6 bar adjustment, secondary exhausting, manifold mounting and IP65 protection.

Key Features

  • Pressure regulator for working port 4 in a vertical pneumatic stack
  • 2–6 bar pressure-regulation range
  • Constant output-pressure function with secondary exhausting
  • 0.5–10 bar specified inlet-pressure range
  • 21 mm construction width and 180 g product weight
  • Mounting on a manifold sub-base; any mounting position
  • Pressure-gauge connection with retaining clamp; gauge selection possible
  • IP65 protection to IEC 60529
  • PA regulator housing and control panel with NBR seals
  • −5 to +50 °C ambient range; 0.65 Nm maximum tightening torque

Set working-port 4 pressure from 2 to 6 bar within the valve stack, with secondary exhausting for the regulated circuit.

Technical Specification Matrix

ParameterValue
Construction width21 mm
Mounting positionAny
Vertical pneumatic linkagePressure regulator for 4
Controller functionOutput pressure constant; With secondary exhausting
Selection of pressure gaugepossible
Pressure regulation range2 bar...6 bar
Inlet pressure 10.5 bar...10 bar
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Degree of protectionIP65; To IEC 60529
Ambient temperature-5 °C...50 °C
Max. tightening torque0.65 Nm
Physical Weight (kg)0.18
Mounting with vertical stackingOn manifold sub-base
Pressure gauge connectionWith retaining clamp
Note on materialsRoHS compliant
Material control panelPA
Material sealsNBR
Material regulator housingPA

Industrial Applications

1. Reduced Pressure for One Cylinder Working Direction

An assembly fixture needs a lower working pressure in the cylinder chamber connected to valve port 4 than the main machine supply. This regulator plate provides a 2–6 bar adjustment for that working port within the vertical stack. Its constant-output-pressure function supplies the selected regulated circuit without requiring the opposite valve working port to use the same setting.

Problem Solved

Port-specific regulation gives one cylinder working line a defined pressure setting, supporting a different pneumatic operating condition for that direction from the surrounding supply circuit.

Regulation for port 4 2–6 bar Constant output pressure

2. Downstream Pressure Reduction During Fixture Adjustment

During a fixture changeover, the regulated working-port pressure needs to be reduced from the previous setup value. The plate's secondary-exhausting function relieves pressure from the regulated side as part of its controller function. Its pressure-gauge connection permits an appropriate gauge to be fitted for observing the local pressure while the operator adjusts the regulator within the 2–6 bar range.

Problem Solved

Secondary exhausting provides a relief path for the regulated side, supporting pressure reduction during adjustment instead of depending only on downstream consumption to lower that pressure.

Secondary exhausting Gauge connection 2–6 bar

3. Integrated Regulation at a Manifold Valve Position

A machine builder needs pressure adjustment at a specific valve position while keeping pneumatic components grouped on the manifold. The regulator plate mounts vertically on the manifold sub-base and occupies a 21 mm construction width. This arrangement places regulation for port 4 within the valve stack, with a local gauge connection and IP65 protection for the installed component.

Problem Solved

Vertical-stack mounting brings the port-specific regulator to the valve position, consolidating pressure adjustment and its gauge connection within the manifold assembly rather than a separate remote location.

Vertical stacking 21 mm width IP65
Select your currency