1. Vacuum Threshold Confirmation on a Suction Head
A handling station needs a discrete indication that its suction circuit has reached a selected vacuum level. The switch connects through G1/8 and allows a vacuum threshold between −0.95 and −0.2 bar. Its changeover contact supplies the controller interface, while the yellow LED provides a local indication during adjustment and operation of the suction circuit.
Problem Solved
The adjustable threshold turns the measured vacuum condition into a discrete machine signal, supporting sequence decisions based on vacuum level rather than the vacuum-generator command alone.
Adjustable vacuum threshold
Changeover contact
G1/8
2. Monitoring Vacuum Loss at a Holding Fixture
A vacuum fixture needs an indication when its pressure condition crosses the selected switch threshold during a holding operation. The relative-pressure switch observes the connected circuit and changes its contact state as the threshold condition changes. Its −1 to 1.6 bar operating envelope and 3 Hz maximum switching frequency define the component range for that monitoring task.
Problem Solved
A contact-state change exposes a vacuum-threshold crossing to the machine controller, providing a simple indication of a changed holding-circuit condition without claiming a quantified leakage measurement.
Relative pressure
3 Hz maximum
−1 to 1.6 bar
3. Pressure-State Feedback during a Vacuum Release Sequence
A placement station removes vacuum or introduces a release action before moving its handling head away. The changeover switch provides a pressure-state signal as the circuit moves across the adjusted vacuum threshold. The Type A electrical interface and yellow switching LED support integrating that feedback into the release sequence, while the complete circuit determines whether the part has physically separated.
Problem Solved
Pressure-dependent switching supplies feedback about the vacuum-circuit transition during release, helping distinguish the pneumatic condition from the controller command without treating it as direct part-detachment sensing.
Changeover feedback
Yellow LED
Type A interface