1. Air-Signal Control of a Transfer Cylinder
A machine uses pneumatic signals to move a double-acting transfer cylinder between two positions. The 5/2-way valve alternates pressure and exhaust at the working connections, with pneumatic spring reset providing the alternate routing state. Its 18 mm ISO 15407-1 sub-base and 550 l/min nominal flow define the selected component, with working and pilot pressures each specified at 2–10 bar.
Problem Solved
Pneumatic actuation and spring reset provide the two directional circuit states required by the cylinder, supporting an air-signal sequence through a standardized sub-base interface.
5/2 monostable
Pneumatic spring reset
ISO 18 mm
2. Opening and Closing a Pneumatic Gripper
A handling fixture uses a double-acting gripper whose two air lines need alternating supply and exhaust. The pneumatic 5/2 valve supplies those routing states without an electrical coil interface at the valve body. Its throttleable exhaust permits the surrounding circuit to include appropriate flow controls for motion adjustment, while the documented 2–10 bar pilot range defines the command-air condition.
Problem Solved
Two working-path states support gripper opening and closing, while throttleable exhaust allows the machine circuit to shape the resulting pneumatic motion using external flow-control components.
Pneumatic actuation
Throttleable exhaust
2–10 bar pilot
3. Directional Commands for a Reversible Air Motor
A compatible reversible pneumatic motor needs alternating air routes to select its direction. The valve combines a five-port two-position function with reversible flow, providing the directional routing through an ISO 18 mm sub-base. Its 11 ms switch-on and 20 ms switch-off component times characterize the valve, while motor acceleration, run-down and load response depend on the complete drive arrangement.
Problem Solved
One air-actuated valve selects the motor circuit directional paths, providing a defined routing component for pneumatic direction commands without assigning an unsupported stopping or positioning guarantee.
Reversible flow
11 ms on / 20 ms off
5/2 routing