1. Air-Signal-Controlled Transfer Cylinder
A machine uses pneumatic control signals to command a suitable double-acting transfer cylinder. The VSPA provides two directional working states and an pressurised-centre state, with mechanical spring reset and 3–10 bar control pressure at ports 12 and 14. Its 1000 l/min interlinked nominal flow and ISO 15407-1 interface characterize the valve within the cylinder's pneumatic control assembly.
Problem Solved
Pneumatic control signals select the cylinder circuit's directional routes, while the pressurised centre supplies a distinct pressurised valve state between the working commands.
Pneumatic actuation
5/3 pressurised centre
3–10 bar pilot
2. Vacuum-Compatible Routing with Positive Control Signals
A pneumatic handling circuit needs directional routing below atmospheric working pressure while retaining positive-pressure valve commands. The VSPA permits working pressure down to −0.9 bar and reversible flow, with 3–10 bar pilot signals supplied separately to the control ports. Its pressurised-centre function provides an additional pressurised routing state for the chosen working circuit, rather than a closed neutral path.
Problem Solved
The distinct working and control pressure ranges permit pneumatic actuation of a negative-pressure routing circuit, keeping the positive control signal independent of the working vacuum condition.
−0.9 bar working range
Positive pneumatic signals
Reversible flow
3. Air-Signal Operation of a Double-Acting Gripper
A handling station controls a suitable double-acting gripper with pneumatic signals and needs a pressurised centre valve state between directional commands. The 5/3 valve provides that arrangement through a 26 mm ISO 15407-1 sub-base, with mechanical spring reset. Its 13 ms on and 32 ms off component times characterize switching, while gripper construction and workpiece loading determine the physical result of centre pressurization.
Problem Solved
Pneumatic signals select the gripper circuit directional paths and a defined pressurised centre condition, providing a documented three-state routing component for the handling sequence.
Pneumatic actuation
5/3 pressure centre
13 ms on / 32 ms off