Sale!

Festo 534537 Solenoid Valve, 5/2 Double Solenoid, ISO 26 mm

Original price was: USD 294.84.Current price is: USD 253.50.

24 V DC valve with 1100 l/min nominal flow, four-pin M8 central plug, internal piloting, 15 ms reversal and holding-current reduction.

SKU Festo-534537 Category
Festo Solenoid Valves

Festo VSVA-B-B52-H-A1-1R2L Solenoid Valve

BrandFesto
Model IdentifierVSVA-B-B52-H-A1-1R2L
Official Part Number534537

Technical Overview

The Festo VSVA-B-B52-H-A1-1R2L is a 26 mm-wide double-solenoid valve providing 5/2-way pneumatic routing on an ISO 15407-1 sub-base. Internal piloting requires 3–8 bar operating pressure, with non-reversible flow and 1100 l/min standard nominal capacity. The manufacturer separately rates valve-only flow at 1400 l/min and both individual-sub-base and interlinked flow at 1100 l/min. A four-pin M8 central plug supplies the 24 V DC electrical interface, with holding-current reduction from 110 mA pickup to 30 mA after 20 ms per coil. The 270 g unit has a 15 ms reversal time, LED indication, non-detenting manual override and IP65/NEMA 4 protection.

26 mm ISO 15407-1 double-solenoid 5/2-way valve with four-pin M8 connection, 1100 l/min nominal flow and 15 ms reversal.

Key Features

  • 5/2-way double-solenoid directional function
  • 26 mm construction width with ISO 15407-1 sub-base interface
  • 1100 l/min standard nominal flow
  • 1400 l/min valve-only flow; 1100 l/min on individual sub-base or interlinked
  • Internal pilot supply and 3–8 bar operating range
  • 24 V DC interface through four-pin M8 central plug
  • Holding-current reduction: 110 mA pickup, 30 mA after 20 ms per coil
  • 15 ms reversal time and 100% duty cycle
  • LED indication, non-detenting manual override and reverse-polarity protection
  • 270 g product weight and IP65/NEMA 4 protection

Control two pneumatic directional states on a 26 mm ISO sub-base with 1100 l/min nominal flow, a four-pin M8 interface and holding-current reduction.

Technical Specification Matrix

ParameterValue
Valve function5/2-way, double solenoid
Type of actuationElectrical
Construction width26 mm
Standard nominal flow rate (standardised to DIN 1343)1100 l/min
pneumatic working portSub-base size 26 mm to ISO 15407-1
Operating voltage24 V DC
Operating pressure0.3 MPa...0.8 MPa; 3 bar...8 bar
DesignPiston gate valve
ApprovalRCM; c UL us - Recognised (Oil)
CE mark (see declaration of conformity)To EU EMC Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions
Degree of protectionIP65; NEMA 4
Nominal size9 mm
Mounting grid pitch27 mm
Exhaust-air functionCan be throttled; Via throttle plate; Via individual sub-base
Sealing principleSoft
Mounting positionAny
Conforms to standardISO 15407-1
Manual overrideNon-detenting
Type of pilotingPiloted
Pilot air supplyInternal
Flow directionNon-reversible
lapOverlap
Reverse polarity protectionFor all electrical connections
Additional functionsHolding current reduction; Safety shut-off
Signal status displayLED
Flow rate of valve1400 l/min
Flow rate of valve on individual sub-base1100 l/min
Flow rate of pneumatically interlinked valve1100 l/min
Switching time reversal15 ms
Duty cycle100%
Max. positive test pulse with 0 signal400 µs
Max. negative test pulse with 1 signal100 µs
Nominal pick-up current per solenoid coil110 mA to 20 ms
Nominal current with current reduction30 mA after 20 ms
Characteristic coil data24 V DC: low-current phase 1.0 W, high-current phase 2.4 W
Permissible voltage fluctuations+/-10%
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN; 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-5 °C...50 °C
Relative air humidity0 - 90%
Protection against direct and indirect contactPELV
Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature-5 °C...50 °C
Max. tightening torque for valve mounting1.8 Nm...2.2 Nm
Physical Weight (kg)0.27
Electrical connection4-pin; M8x1; Central plug; Round design
Type of mountingOn sub-base; Via through-hole and screw
Note on materialsRoHS compliant
Material sealsFluoro rubber; HNBR; NBR
Material housingDie-cast aluminium

Industrial Applications

1. Transfer-Cylinder Directional Control

An assembly station moves a part-transfer cylinder between two positions. The valve's 5/2-way double-solenoid function alternates the working air connections, while its four-pin M8 central plug connects the electrical commands. A standardized 26 mm ISO 15407-1 sub-base organizes the pneumatic connections beneath the valve, and LED indication helps identify the applied command during commissioning.

Problem Solved

Two directional valve states provide cylinder advance and return routing, while the standardized sub-base and central M8 electrical connection organize the transfer station's pneumatic control interface.

5/2-way 26 mm sub-base 24 V DC

2. Double-Acting Gripper Direction Commands

A handling machine operates a suitable double-acting gripper between its open and closed circuit states. The double-solenoid 5/2-way valve selects the two directional connections using its 24 V DC four-pin M8 interface. Internal pilot operation at 3–8 bar defines the working supply requirement, while holding-current reduction characterizes the coil drive when an electrical command remains applied.

Problem Solved

The two solenoid commands select the gripper circuit routing states, with internal pilot and electrical-interface specifications defining the valve arrangement for the handling sequence.

5/2 double solenoid 3–8 bar internal pilot Holding-current reduction

3. Standardized Valve-Station Integration

A machine builder groups directional functions around ISO 15407-1 sub-base interfaces and connects each valve through a four-pin M8 central plug. This 26 mm valve has a 27 mm mounting grid pitch, making its station spacing explicit. The manufacturer distinguishes 1400 l/min valve-only flow from the 1100 l/min sub-base and interlinked ratings, supporting assessment against the actual pneumatic station arrangement.

Problem Solved

Standardized mounting and the central M8 electrical interface define station integration, while arrangement-specific flow data and grid pitch provide concrete information for the grouped pneumatic layout.

ISO 15407-1 27 mm grid pitch Central M8 plug
Select your currency