1. Reciprocating Part-Transfer Cylinder
An assembly machine uses a double-acting cylinder to transfer a component between two nearby positions. The valve's 5/2-way function alternates pressure and exhaust between the ISO sub-base working connections. One 24 V DC solenoid commands the valve, with pneumatic spring reset providing its alternate state. The 18 mm body and sub-base mounting support grouping the pneumatic controls in the machine.
Problem Solved
Two working ports provide the directional switching needed for extension and retraction, while standardized sub-base mounting keeps the transfer mechanism's pneumatic controls grouped together.
5/2-way
ISO size 18 mm
18 mm valve
2. Pneumatic Gripper Open-and-Close Sequencing
A handling unit needs a solenoid command and mechanical reset state for a double-acting pneumatic gripper. This valve routes pressure and exhaust between the gripper’s two air lines through its 5/2-way function. Internal pilot air operates within 3–8 bar, and the three-pin M12x1 central plug connects the valve’s 24 V DC command to machine wiring.
Problem Solved
Single-solenoid routing with pneumatic spring reset provides two valve states for the gripper circuit, while the central M12x1 plug defines the control-command connection.
Pneumatic spring reset
24 V DC
Central M12x1 plug
3. Two-Position Product Diverter Actuation
A packaging conveyor uses a pneumatic actuator to move a small product diverter between two routes. This valve selects the actuator's air connections through its 5/2-way function, with 20 ms switch-on and 25 ms switch-off times specified for the component. The 550 l/min nominal flow and ISO sub-base working connections characterise the selected valve for evaluating the pneumatic arrangement.
Problem Solved
Directional switching operates the diverter between its two routes, while the documented switching times and nominal flow provide component data for planning the pneumatic command sequence.
20 ms on
25 ms off
550 l/min nominal