1. Three-State Linear Transfer Control
A pneumatic transfer axis needs extension, retraction and a neutral valve command between machine steps. The 5/3-way closed-centre function supplies the two directional working states and a centre state that blocks the valve working paths. The ISO 15407-1 sub-base and 1000 l/min interlinked nominal flow characterize the selected valve station, with internal piloting within a 3–8 bar operating range.
Problem Solved
The closed centre provides a distinct blocked valve-routing state between directional commands, giving the controller a neutral circuit command alongside extension and retraction.
5/3 closed centre
ISO 15407-1
1000 l/min
2. Gripper Circuit with a Closed Neutral State
A handling machine needs open, close and closed-neutral valve commands for a suitable double-acting pneumatic gripper circuit. The closed-centre function supplies the third routing state, while internal piloting operates within the 3–8 bar working range. A four-pin M8 central plug supplies the electrical commands, and holding-current reduction characterizes the coil drive while a working command remains applied.
Problem Solved
Three directional routing states support the gripper sequence, while the central electrical connection and holding-current reduction define the valve interface for maintaining a commanded working state.
Closed neutral
Internal pilot
Holding-current reduction
3. Reversible Pneumatic Motor Routing
A machine uses a suitable reversible pneumatic motor and needs forward, reverse and closed-centre neutral routing commands. This valve supplies those states through its ISO 15407-1 interface, with a four-pin M8 central electrical plug. Specified 20 ms on and 52 ms off times characterize the valve component, while motor run-down and stopping behavior remain properties of the complete drive and load.
Problem Solved
One electrically commanded valve provides forward, reverse and closed-centre neutral air routing, with documented component switching times for evaluating its place in the pneumatic motor command sequence.
Forward/reverse/closed neutral
20 ms on
52 ms off