1. Normally Open Air-Purge Branch Control
A machine needs two air-purge branches whose normal valve states are open, with electrical commands changing the respective routing states. This dual 3/2 normally open valve provides both functions in one 26 mm body, with pneumatic spring reset. Internal piloting at 3–8 bar and a four-pin M8 central connection define the pneumatic supply and electrical command interfaces of the selected valve.
Problem Solved
Two normally open functions consolidate the purge-branch routing in one valve body, providing electrical switching and pneumatic spring return for circuits designed around an open normal state.
2 × 3/2 normally open
Pneumatic spring
3–8 bar
2. Energize-to-Vent Single-Acting Fixture Circuits
A fixture uses suitable single-acting pneumatic mechanisms whose working lines require pressure in the normal valve state and venting when commanded. The two normally open 3/2 functions provide that routing arrangement, while pneumatic spring reset restores the respective normal states. The four-pin M8 interface carries the electrical commands, and holding-current reduction characterizes the coil drive during a maintained energized command.
Problem Solved
The normally open three-port functions provide pressure and vent routing for energize-to-vent fixture circuits, consolidating the two pneumatic functions with their documented electrical command interface.
Normally open routing
Four-pin M8
Holding-current reduction
3. Dual-Function ISO Valve-Station Integration
A machine builder groups two normally open branch functions at a single ISO valve position and needs flow data matched to the station arrangement. This 26 mm valve has a 27 mm mounting pitch and separately specified 1250 l/min valve-only, 1000 l/min individual-sub-base and 900 l/min interlinked flows. Those distinctions characterize the actual installation more precisely than using the valve-only rating for every station.
Problem Solved
Dual functions consolidate branch routing at one standardized valve position, while arrangement-specific flow ratings and installation pitch provide concrete data for planning the pneumatic station layout.
ISO 15407-1
27 mm pitch
Arrangement-specific flow