1. Three-State Linear Transfer Control
A pneumatic transfer axis needs extension, retraction and a neutral command between machine steps. The 5/3-way valve connects a double-acting cylinder to two directional states and a closed-centre state. Its M7 ports and 300–320 l/min standard nominal flow provide a defined connection and flow basis for selecting the surrounding cylinder circuit.
Problem Solved
A closed-centre third state blocks the valve's working paths between directional commands, giving the controller a distinct neutral circuit state alongside extension and retraction.
5/3-way closed centre
M7
300–320 l/min nominal
2. Gripper Circuit with a Neutral Valve State
A handling machine operates a double-acting pneumatic gripper through open, close and neutral valve commands. The valve's closed-centre function provides the third circuit state, while spring reset returns the spool when its actuation is removed. Internal pilot air and a sub-base electrical connection support grouping the gripper controls with other pneumatic functions on a manifold rail.
Problem Solved
Three valve states support a gripper sequence with a defined neutral connection state, while internal piloting and manifold mounting consolidate the pneumatic control assembly.
Closed centre
Spring reset
Manifold mounting
3. Reversible Pneumatic Motor Command Circuit
A machine uses a suitable reversible pneumatic motor for a positioning or winding task. The 5/3-way arrangement provides two directional air-routing commands and a closed-centre neutral command through the M7 working ports. The specified switching times support sequence planning; the motor's run-down and mechanical stopping behaviour remain properties of the complete motor and load system.
Problem Solved
One directional valve provides forward, reverse and neutral air-routing commands, allowing the machine controller to select the required circuit state through its electrical sub-base.
Forward/reverse/neutral
24 V DC
14 ms reversal