1. Normally Supplied Air Branch with Commanded Interruption
A machine process uses an air branch that is supplied in the valve’s unactuated state and interrupted under electrical command from a separately selected compatible coil. The normally open 3/2-way function provides supply-and-exhaust switching for that arrangement. Its G1/8 working ports and 700 l/min nominal flow characterize the branch connection, while pneumatic spring reset returns the valve to its normal switching state with pilot air available.
Problem Solved
Normally open routing supports a process branch that requires air supply in the unactuated valve state, with electrical actuation changing the working connection during the sequence.
3/2-way normally open
700 l/min nominal
Pneumatic spring reset
2. Separate-Pilot Control of a Low-Pressure Fixture Branch
A fixture branch uses a working pressure lower than the valve’s required actuation pressure. The external pilot connection accepts 2.5–10 bar independently of the specified working circuit, allowing the positive pilot supply to operate the valve. The normally open 3/2-way function defines how the fixture branch is supplied and exhausted, when fitted with a separately selected compatible solenoid coil.
Problem Solved
External pilot air separates the valve’s actuation requirement from the fixture’s working-pressure setting, supporting normally open switching when the process branch uses a different pressure condition.
External pilot
2.5–10 bar pilot
Normally open routing
3. Manual Commissioning of a Pneumatic Station
During commissioning, a station needs to exercise its pneumatic branch locally before completing the electrical sequence. Detenting and non-detenting manual override allow valve actuation at the body, while pneumatic spring reset provides the normally open return function with pilot air available. Manifold-rail or through-hole mounting supports installing the valve body in the pneumatic assembly.
Problem Solved
Local manual actuation lets the pneumatic branch be exercised at the valve during commissioning, supporting observation of the connected mechanism alongside the electrical control checks.
Manual override
Pneumatic spring reset
Manifold mounting