1. Single-Acting Fixture Actuator Control
A fixture uses a single-acting pneumatic mechanism whose working line needs pressure and exhaust routing under an electrical command. The 3/2 normally closed body provides that directional function, with pneumatic spring reset and internal piloting at 2.5–10 bar. A separately selected compatible coil supplies the electrical actuation, while the G1/4 ports and 1000 l/min nominal flow characterize the pneumatic interface.
Problem Solved
The three-port directional function supplies the pressure and exhaust states for a single-acting circuit, with the fixed pneumatic body kept distinct from the separately selected electrical coil.
3/2 normally closed
G1/4
Pneumatic spring
2. Commanded Air Delivery to a Process Nozzle
A process station needs to switch a compressed-air nozzle branch between its commanded working state and the normal closed valve state. This body provides 1000 l/min standard nominal flow through G1/4 connections, with documented 13 ms on and 26 ms off component times. The surrounding nozzle, tubing and selected coil complete the installation; those valve times do not independently establish the resulting air-pulse duration at the nozzle.
Problem Solved
The normally closed directional body provides a documented switching element for the nozzle supply branch, with flow and timing characteristics for evaluating the pneumatic command sequence.
1000 l/min
13 ms on
26 ms off
3. Grouped Branch Control in a Pneumatic Station
A machine builder groups several independently commanded pneumatic branches on a valve rail. This 26.5 mm valve body supports manifold-rail mounting and has an internal pilot arrangement, keeping actuation supplied from its documented working-pressure range. The manufacturer ordering configuration excludes the solenoid coil, allowing the electrical coil selection to be made explicitly for the station while preserving the fixed normally closed pneumatic function.
Problem Solved
Rail mounting groups the branch-control hardware, while a separately selected coil gives the station an explicit electrical actuation configuration without changing the identified pneumatic valve body.
Manifold-rail mounting
26.5 mm valve
Separate coil selection