1. Reciprocating Part-Transfer Cylinder
An assembly machine uses a double-acting cylinder to transfer a component between two nearby positions. The valve's 5/2-way function alternates pressure and exhaust between the G1/4 working connections. One 24 V DC solenoid commands the valve, with mechanical spring reset providing its alternate state. The 26.5 mm body and manifold mounting support grouping the pneumatic controls in the machine.
Problem Solved
Two working ports provide the directional switching needed for extension and retraction, while compact manifold mounting keeps the transfer mechanism's pneumatic controls grouped together.
5/2-way
G1/4 working ports
26.5 mm valve
2. Pneumatic Gripper Open-and-Close Sequencing
A handling unit needs a solenoid command and mechanical reset state for a double-acting pneumatic gripper. This valve routes pressure and exhaust between the gripper’s two air lines through its 5/2-way function. Internal pilot air operates within the 2.5–10 bar working range, and the Type C connector links the 24 V DC actuation to the machine wiring.
Problem Solved
Single-solenoid routing and mechanical spring reset provide two valve states for the gripper circuit, while the Type C electrical interface connects the directional command to the machine controls.
Mechanical spring reset
24 V DC
Type C connection
3. Two-Position Product Diverter Actuation
A packaging conveyor uses a pneumatic actuator to move a small product diverter between two routes. This valve selects the actuator's air connections through its 5/2-way function, with 12 ms switch-on and 47 ms switch-off times specified for the component. The 1300 l/min nominal flow and G1/4 working connections characterise the selected valve for evaluating the pneumatic arrangement.
Problem Solved
Directional switching operates the diverter between its two routes, while the documented switching times and nominal flow provide component data for planning the pneumatic command sequence.
12 ms on
47 ms off
1300 l/min nominal