1. Pneumatically Commanded Transfer Cylinder
An assembly machine uses an air-signal sequence to move a double-acting transfer cylinder between two positions. The valve’s 5/2-way function alternates pressure and exhaust between the G1/8 working lines. Pneumatic actuation at M5 pilot port 14 commands one state, while mechanical spring return provides the monostable reset action for the transfer circuit.
Problem Solved
An air signal controls the cylinder’s directional routing through a monostable valve, providing extension-and-retraction switching without requiring an electrical actuator at the valve location.
5/2-way
M5 pilot port 14
Mechanical spring return
2. Pneumatic Gripper Open-and-Close Control
A handling unit operates a double-acting gripper from an existing pneumatic command circuit. This valve provides two working-air paths through its 5/2-way function, with G1/8 connections and 700 l/min standard nominal flow. Manifold-rail mounting supports grouping the gripper control with adjacent functions, while the 2.5–10 bar pilot range defines the air-command requirement.
Problem Solved
Pneumatic directional switching routes the gripper’s two air lines through one component, and manifold mounting groups that control function with the handling unit’s other pneumatic commands.
Pneumatic actuation
G1/8 working ports
700 l/min nominal
3. Two-Position Conveyor Diverter
A conveyor uses a pneumatic actuator to move a diverter between two product routes. The valve selects the actuator’s working-air connections through its monostable 5/2-way function. Published 7 ms switch-on and 39 ms switch-off times give component timing information for arranging the air-signal sequence alongside the actual response of the actuator and connected tubing.
Problem Solved
The valve supplies the directional air routing for two diverter positions, while documented switching times support planning the pneumatic commands and mechanical spring return defines the alternate valve state.
7 ms on
39 ms off
5/2-way monostable