SICK 1058174 WL9L-3P2232 PNP Laser Retro-Reflective Sensor

USD 236.60

WL9L-3P2232 combines a 1 mm laser spot at 500 mm, coaxial retro-reflective sensing, complementary PNP outputs, teach-in and an M8 4-pin connector.

SKU SICK-1058174 Category
SICK W9

SICK WL9L-3P2232 PNP Laser Retro-Reflective Sensor

BrandSICK
Model IdentifierWL9L-3P2232
Official Part Number1058174

Technical Overview

The SICK WL9L-3P2232 is a laser retro-reflective photoelectric sensor with coaxial optics and complementary PNP outputs. Its autocollimation arrangement operates without a minimum reflector distance, allowing a passive reflector to sit close to the sensor. With a PL80A reflector, the specified sensing range is 0–8 m and the maximum range is 0–12 m. The 650 nm Class 1 laser produces a 1 mm spot at 500 mm for small-object detection, and a single teach-in button sets sensitivity. A response of no more than 0.5 ms, 1,000 Hz switching frequency, M8 4-pin connector and IP66/IP67/IP69K VISTAL housing support machine integration.

Class 1 coaxial laser retro-reflective sensor with a 1 mm spot at 500 mm, complementary PNP outputs, teach-in and M8 4-pin connector.

Key Features

  • Laser retro-reflective sensing with coaxial optics
  • No minimum reflector distance
  • 0–8 m sensing range with PL80A reflector
  • 0–12 m maximum range with PL80A reflector
  • 650 nm Class 1 visible red laser; Ø 1 mm at 500 mm
  • Single teach-in button; small-object detection
  • Complementary PNP light/dark outputs
  • Response ≤ 0.5 ms; 1,000 Hz switching
  • M8 4-pin male connector; M3 mounting holes
  • VISTAL housing with IP66/IP67/IP69K protection

Define a small detection point with a 1 mm laser spot at 500 mm while coaxial optics allow close reflector placement.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric retro-reflective sensor with autocollimation/coaxial optics; no minimum reflector distance
Sensing range0–8 m with PL80A reflector
Maximum sensing range0–12 m with PL80A reflector
Light sourceLaser, visible red light
Wavelength650 nm
Light spot sizeØ 1 mm at 500 mm
AdjustmentSingle teach-in button
MountingM3 mounting holes
Power supply10–30 V DC; short-circuit-protected network, max. 8 A
Residual ripple< 5 Vpp; remain within supply-voltage limits
Current consumption30 mA without load
Switching outputPNP, complementary
Switching modeLight/dark switching; Q = light switching
Output current≤ 100 mA; maximum 50 mA at and above +50 °C in extended operation
Response time≤ 0.5 ms with resistive load
Switching frequency1,000 Hz at light/dark ratio 1:1
ConnectionMale connector M8, 4-pin
Circuit protectionSupply/input/output reverse-polarity protection and interference suppression
Protection classIII
Housing formRectangular
Housing materialVISTAL plastic
Optics materialPMMA plastic
IP ratingIP66, IP67 and IP69K
Operating temperature−10 to +50 °C
Storage temperature−30 to +70 °C
UL fileNRKH.E181493
MTTFD616 years (EN ISO 13849-1, parts-count calculation)
Diagnostic coverage DCavg0%
Mission time10 years
Dimensions L x W x H (cm)2.36 x 1.22 x 4.98
Physical Weight (kg)0.013
Laser class1 (IEC 60825-1 / CDRH 21 CFR 1040.10 & 1040.11)
Special applicationDetecting small objects
Extended operating temperature−30 to +55 °C under manufacturer operating conditions
Extended-temperature power limitsAt and above +50 °C: maximum supply 24 V; maximum load current 50 mA
Cold-operation conditionBelow −10 °C only after power-on above −10 °C followed by cooling without switching off; no power-on below −10 °C

Industrial Applications

1. Counting small separated components

A feeder can position the sensor and a reflector across a component transfer path so each separated opaque part interrupts the laser beam. The 1 mm spot at 500 mm defines a local detection point, while a single teach-in button sets sensitivity. Complementary PNP outputs deliver the light and dark states to the machine counter.

Problem Solved

A defined laser detection point isolates component passages, providing an electrical count event when each separated part crosses the monitored position without touching the moving material.

Ø 1 mm at 500 mm PNP Teach-in

2. Monitoring accumulation at a transfer point

At a conveyor transfer, a load that remains between the sensor and reflector holds the received-light signal in the blocked state. The machine controller can use this duration to identify sustained occupancy and regulate upstream release. Complementary PNP outputs provide light and dark switching signals, while the M8 4-pin connector connects the sensor to local machine wiring.

Problem Solved

A sustained beam blockage identifies a transfer position that remains occupied, helping the controller coordinate upstream feeding before additional loads enter the same constrained space.

Complementary PNP M8 4-pin connector Beam interruption

3. Checking opaque sheet continuity

An opaque sheet feeder can direct the returned beam through the expected material path. The sensor detects whether the material continues to block that path, and an opening caused by runout or a break changes its switching state. IP67 protection suits exposed machine mounting, while the visible red beam assists positioning during initial setup.

Problem Solved

A change in the received-light state gives the controller an electrical indication of missing material at the monitoring position, supporting an orderly response to interrupted feed.

IP67 Visible red light Material continuity
Select your currency