SICK 1058230 WTB9L-3P2261 PNP Laser BGS Sensor

USD 313.30

WTB9L-3P2261 combines a 1 mm laser spot at 170 mm, background suppression, complementary PNP outputs, 1,000 Hz switching and an M8 4-pin connector.

SKU SICK-1058230 Category
SICK W9

SICK WTB9L-3P2261 PNP Laser Background-Suppression Sensor

BrandSICK
Model IdentifierWTB9L-3P2261
Official Part Number1058230

Technical Overview

The SICK WTB9L-3P2261 is a laser photoelectric proximity sensor with background suppression and complementary PNP outputs. Its 650 nm visible red laser forms a 1 mm spot at 170 mm, supporting detection of small targets while rejecting more distant backgrounds. The specified sensing range is 25–300 mm on a white reference target having 90% remission. A five-turn potentiometer adjusts the sensing setting, and the Class 1 laser optical system provides a defined detection point. A response of no more than 0.5 ms, 1,000 Hz switching frequency, M8 4-pin connector and IP66/IP67/IP69K VISTAL housing support machine integration.

Class 1 laser background-suppression sensor with 25–300 mm reference-target sensing, complementary PNP outputs, 1,000 Hz switching and M8 connector.

Key Features

  • Laser sensing with background suppression
  • 25–300 mm sensing range on 90% remission reference white
  • 650 nm visible red Class 1 laser
  • Ø 1 mm light spot at 170 mm
  • Five-turn potentiometer adjustment
  • Complementary PNP light/dark outputs
  • Response ≤ 0.5 ms; 1,000 Hz switching
  • 10–30 V DC; 30 mA without load
  • M8 4-pin male connector; M3 mounting holes
  • VISTAL housing with IP66/IP67/IP69K protection

Place a 1 mm laser spot on small targets while background suppression limits responses from more distant machine surfaces.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric proximity sensor with background suppression
Sensing range25–300 mm on 90% remission white target (DIN 5033)
Maximum sensing range25–300 mm on 90% remission white target (DIN 5033)
Light sourceLaser, visible red light
Wavelength650 nm
Light spot sizeØ 1 mm at 170 mm
AdjustmentPotentiometer, 5 turns
MountingM3 mounting holes
Power supply10–30 V DC; short-circuit-protected network, max. 8 A
Residual ripple< 5 Vpp; remain within supply-voltage limits
Current consumption30 mA without load
Switching outputPNP, complementary
Switching modeLight/dark switching; Q = light switching
Output current≤ 100 mA; maximum 50 mA at and above +50 °C in extended operation
Response time≤ 0.5 ms with resistive load
Switching frequency1,000 Hz at light/dark ratio 1:1
ConnectionMale connector M8, 4-pin
Circuit protectionSupply/input/output reverse-polarity protection and interference suppression
Protection classIII
Housing formRectangular
Housing materialVISTAL plastic
Optics materialPMMA plastic
IP ratingIP66, IP67 and IP69K
Operating temperature−10 to +50 °C
Storage temperature−30 to +70 °C
UL fileNRKH.E181493
MTTFD424 years (EN ISO 13849-1, parts-count calculation)
Diagnostic coverage DCavg0%
Dimensions L x W x H (cm)2.36 x 1.22 x 4.98
Physical Weight (kg)0.013
Laser class1 (IEC 60825-1 / CDRH 21 CFR 1040.10 & 1040.11)
Special applicationDetecting small objects
Extended operating temperature−30 to +55 °C under manufacturer operating conditions
Extended-temperature power limitsAt and above +50 °C: maximum supply 24 V; maximum load current 50 mA
Cold-operation conditionBelow −10 °C only after power-on above −10 °C followed by cooling without switching off; no power-on below −10 °C

Industrial Applications

1. Workpiece detection in front of a machine frame

An assembly fixture must detect an opaque workpiece without responding to a structure farther behind it. Background suppression separates the intended near target from more distant surfaces within the documented operating geometry. The 25–300 mm sensing range on a white target with 90% remission and five-turn adjustment support a defined detection position, while the PNP output supplies the workpiece signal to the controller.

Problem Solved

Distance-based background rejection reduces unwanted detections from the machine structure behind the fixture, giving the sequence controller a clearer indication that the intended workpiece occupies the sensing point.

Background suppression 25–300 mm PNP

2. Counting separated components on a conveyor

A narrow conveyor carrying separated components needs a switching event at each passing part. The sensor directs a laser spot of approximately 1 mm diameter at 170 mm toward the detection point. Background suppression helps distinguish the raised components from a more distant belt surface, and the 1,000 Hz switching frequency supports repeated transitions within the specified operating limits.

Problem Solved

A defined optical spot and background rejection help isolate component passages from the belt behind them, supporting repeatable count events without mechanical contact with the moving parts.

Ø 1 mm at 170 mm 1,000 Hz Background suppression

3. Checking tray seating before a handling cycle

A handling station can direct the sensor toward the expected edge of a seated opaque tray. The short sensing range establishes a local presence check, while background suppression limits responses from surfaces farther away when the tray is absent. The response of no more than 0.5 ms supplies a prompt input transition, and complementary PNP outputs provide light and dark switching signals.

Problem Solved

A contactless tray-position signal helps the controller distinguish an occupied pickup location from an empty station, supporting coordinated handling without a mechanical feeler at the tray edge.

≤ 0.5 ms Light/dark switching Short-range detection
Select your currency