SICK 6052357 WL100-2N1439 NPN Retro-Reflective Sensor

USD 72.54

WL100-2N1439 provides 0.01–5.5 m sensing with PL80A reflector, NPN output, 1,000 Hz switching, a 2 m cable and supplied P250 reflector.

SKU SICK-6052357 Category
SICK W100-2

SICK WL100-2N1439 Retro-Reflective Photoelectric Sensor

BrandSICK
Model IdentifierWL100-2N1439
Official Part Number6052357

Technical Overview

The SICK WL100-2N1439 is a retro-reflective photoelectric sensor with a NPN switching output and visible red LED illumination. A reflector returns light to the receiver, and an opaque object is detected when it interrupts that optical path. With a PL80A reflector, the specified sensing range is 0.01–5.5 m and the maximum range is 7.2 m; usable distance depends on the selected reflector. A sensitivity potentiometer and selectable light/dark switching adapt detection and signal logic. The sensor includes a P250 reflector, BEF-W100-A mounting bracket, 2 m cable and IP67 plastic housing, with 1,000 Hz switching for machine event detection.

NPN retro-reflective sensor with 0.01–5.5 m sensing range using PL80A, 1,000 Hz switching, 2 m cable and supplied P250 reflector.

Key Features

  • Retro-reflective detection of opaque targets
  • Dual-lens retro-reflective optical system
  • 0.01–5.5 m sensing range; 7.2 m maximum with PL80A reflector
  • 632 nm visible red LED; Ø 280 mm spot at 4 m
  • Sensitivity potentiometer
  • NPN output with selectable light/dark switching
  • Response ≤ 0.5 ms; 1,000 Hz switching frequency
  • 10–30 V DC supply and 2 m PVC cable
  • IP67 ABS/PC/POM housing
  • BEF-W100-A bracket and P250 reflector supplied

Detect opaque loads across a reflector-based optical path while keeping electrical wiring on one side of the machine.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric retro-reflective sensor with minimum reflector distance, dual-lens system
Sensing range0.01–5.5 m with PL80A reflector
Maximum sensing range0.01–7.2 m with PL80A reflector
Light sourceLED, visible red light
Wavelength632 nm
Light spot sizeØ 280 mm at 4 m
AdjustmentSensitivity potentiometer
Current consumption30 mA without load
Power supply10–30 V DC
Residual ripple±10%; remain within supply-voltage limits
Switching outputNPN
Switching modeLight/dark switching; selectable via rotary switch
Output current≤ 100 mA
Response time≤ 0.5 ms with resistive load
Switching frequency1,000 Hz at light/dark ratio 1:1
Connection3-wire, 2 m PVC cable; do not bend below 0 °C
Conductor cross-section0.18 mm²
Circuit protectionSupply/output reverse-polarity protection; output overcurrent and short-circuit protection
Protection classIII
Housing formRectangular
Housing materialABS/PC/POM plastic
Optics materialPMMA plastic
IP ratingIP67
Operating temperature−25 to +55 °C
Storage temperature−40 to +70 °C
Output signal voltageApproximately supply voltage / < 1.8 V (HIGH/LOW)
Items suppliedBEF-W100-A mounting bracket and P250 reflector
MTTFD954 years
Diagnostic coverage DCavg0%
Dimensions L x W x H (cm)2 x 1.1 x 3.1

Industrial Applications

1. Counting separated opaque cartons

A carton conveyor can place the sensor on one side and a passive reflector on the other. Each opaque carton interrupts the returned red beam, producing a NPN switching event for the counter. Retro-reflective sensing provides the optical path, while the 1,000 Hz switching frequency supports repeated transitions within the specified timing limits.

Problem Solved

The reflector needs no electrical supply, reducing wiring across the conveyor while the machine receives a discrete event for each separated carton that interrupts the beam.

Retro-reflective NPN 1,000 Hz

2. Monitoring accumulation at a transfer point

At a conveyor transfer, a load that remains between the sensor and reflector holds the received-light signal in the blocked state. The machine controller can use this duration to identify sustained occupancy and regulate upstream release. Selectable light/dark switching adapts the signal polarity, while the 2 m cable connects the sensor to local machine wiring.

Problem Solved

A sustained beam blockage identifies a transfer position that remains occupied, helping the controller coordinate upstream feeding before additional loads enter the same constrained space.

Light/dark switching 2 m cable Beam interruption

3. Checking opaque sheet continuity

An opaque sheet feeder can direct the returned beam through the expected material path. The sensor detects whether the material continues to block that path, and an opening caused by runout or a break changes its switching state. IP67 protection suits exposed machine mounting, while the visible red beam assists positioning during initial setup.

Problem Solved

A change in the received-light state gives the controller an electrical indication of missing material at the monitoring position, supporting an orderly response to interrupted feed.

IP67 Visible red light Material continuity
Select your currency