SICK 6010187 WL170-N122 NPN Retro-Reflective Sensor

USD 133.90

WL170-N122 offers NPN retro-reflective sensing, 0.1–0.6 m range with P250, L/D control, ≤0.7 ms response, a 2 m PVC cable and IP67 protection.

SKU SICK-6010187 Category

Out of stock

SICK W170

SICK WL170-N122 NPN Retro-Reflective Sensor

BrandSICK
Model IdentifierWL170-N122
Official Part Number6010187

Technical Overview

The SICK WL170-N122 is a compact retro-reflective photoelectric sensor with an NPN output and visible red LED illumination. A passive reflector returns the optical beam, allowing opaque objects to be detected when they interrupt the path. The specified sensing range is 0.1–0.6 m using P250, while the maximum range is 0.1–0.8 m with PL80A. An L/D control connection selects light or dark switching, and the documented response time is no more than 0.7 ms with a resistive load. A 2 m PVC cable, stainless-steel/ABS housing, PC optics and IP67 enclosure rating support machine mounting.

NPN retro-reflective sensor with 0.1–0.6 m with P250 reflector, visible red LED sensing and Cable, 2 m, PVC; do not bend below 0 °C.

Key Features

  • Retro-reflective sensing with visible red LED
  • 0.1–0.6 m sensing with P250 reflector
  • 0.1–0.8 m maximum range with PL80A reflector
  • NPN output
  • Light/dark switching via L/D control connection
  • Response ≤0.7 ms with resistive load
  • Beam attenuation ≥20%
  • 2 m PVC cable; 0.18 mm² conductors
  • 10–30 V DC operation; 30 mA without load
  • IP67 stainless-steel/ABS housing; PC optics

Monitor optical beam interruptions with a passive reflector while keeping the sensor’s electrical connection on one side of the machine.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric retro-reflective sensor
Sensing range0.1–0.6 m with P250 reflector
Maximum sensing range0.1–0.8 m with PL80A reflector
Switching outputNPN
Light sourceLED, visible red light
Switching modeLight/dark switching, selectable via L/D control cable
Power supply10–30 V DC
Residual ripple±10%
Current consumption30 mA without load
Response time≤0.7 ms with resistive load
Beam attenuation≥20%
ConnectionCable, 2 m, PVC; do not bend below 0 °C
Conductor cross-section0.18 mm²
Housing materialStainless steel/ABS
Optics materialPC plastic
IP ratingIP67
Operating temperature−25 to +55 °C
Storage temperature−40 to +70 °C
MTTFD1,562 years
Diagnostic coverage DCavg0%
UL fileNRNT2.E128350 and NRNT8.E128350
Dimensions L x W x H (cm)2.86 x 1.2 x 3.7

Industrial Applications

1. Counting separated opaque cartons

A carton conveyor can mount the sensor on one side and a suitable passive reflector on the other. Each separated opaque carton interrupts the returned red beam and changes the switching output for the machine counter. The reflector-dependent sensing range defines the available optical span, and actual target spacing must allow distinct transitions.

Problem Solved

Each qualified carton passage produces a discrete electrical event for counting, while the passive reflector avoids the need to route a receiver power cable across the conveyor.

Opaque cartons NPN Retro-reflective

2. Monitoring accumulation at a transfer point

At a conveyor transfer, a load remaining between the sensor and reflector holds the optical path in the blocked condition. The machine controller can evaluate the duration of this state to identify sustained occupancy. Light/dark switching provides the required detection logic, and the electrical connection links the sensor to local machine wiring.

Problem Solved

A sustained beam blockage identifies a transfer position that remains occupied, helping the controller coordinate upstream release before additional loads enter the same constrained space during production.

Load accumulation Light/dark switching Beam interruption

3. Checking opaque sheet continuity

An opaque sheet feeder can direct the returned optical beam through the expected material path so an intact sheet normally blocks received light. A break or runout restores light and changes the switching state. Visible red illumination assists initial positioning, while the documented enclosure rating supports exposed mounting in the machine.

Problem Solved

A change in the received-light state gives the controller an electrical indication of missing material at the monitoring position, supporting a coordinated response when sheet feed is interrupted.

Opaque sheet Visible red light Material continuity
Select your currency