SICK 1067766 WLG4SC-3P2232A91 Timestamp Sensor

USD 103.22

WLG4SC-3P2232A91 offers polarized glass detection, 0–3 m with PL80A, IO-Link timestamps, an eight-event buffer and 52 ms maximum debouncing.

SKU SICK-1067766 Category
SICK W4S-3 Glass

SICK WLG4SC-3P2232A91 IO-Link Timestamp Glass Sensor

BrandSICK
Model IdentifierWLG4SC-3P2232A91
Official Part Number1067766

Technical Overview

The SICK WLG4SC-3P2232A91 detects transparent targets with polarized coaxial retro-reflective optics, a 650 nm PinPoint LED and a reflector. The PL80A sensing range is 0–3 m, with a 0–5 m maximum and greater than 8% detectable beam attenuation. Its Timestamp + debouncing Smart Task records optical events with −90 to +90 µs timestamp accuracy over IO-Link, an eight-event buffer and a 260 ms maximum timestamp range. IO-Link V1.1 communicates at COM2 with a 2.3 ms cycle, carrying two switching states and the selected time value in 16-bit process data. Pin 2 is configurable for input or output functions. Local teach-in, a direct M8 four-pin connection and an IP66/IP67 ABS/PMMA enclosure support installation.

Polarized transparent-object sensor, 0–3 m with PL80A, IO-Link timestamps and eight-event buffering, PNP switching and direct M8 connection.

Key Features

  • Polarized coaxial/autocollimation retro-reflective sensing
  • 0–3 m PL80A sensing range; maximum 0–5 m
  • 650 nm PinPoint LED; typical Ø45 mm spot at 1.5 m
  • Transparent-object detection at >8% beam attenuation with AutoAdapt
  • IO-Link V1.1, COM2 38.4 kBaud, 2.3 ms cycle and 16-bit process data
  • Timestamp + debouncing; −90 to +90 µs IO-Link timestamp accuracy
  • Eight-event timestamp buffer, 260 ms maximum range and 52 ms maximum debounce
  • Configurable pin 2 and local teach button; PNP light/dark switching
  • Device, teach-quality, run-quality and contamination diagnostics
  • 10–30 V DC; direct M8 four-pin connection; IP66/IP67 ABS/PMMA enclosure

Capture optical event timestamps locally for external sequence analysis, with an eight-event buffer and a defined 260 ms maximum range.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric retro-reflective sensing; polarized coaxial/autocollimation optics; reflector required
Sensing range0–3 m with PL80A reflector
Maximum sensing range0–5 m with PL80A reflector
Reflector minimum distanceNo reflector minimum distance with coaxial/autocollimation optics
Polarization filterYes
Light sourceVisible red PinPoint LED
Wavelength650 nm
Light spot sizeTypically Ø45 mm at 1.5 m
LED service lifeAverage 100,000 h at ambient +25 °C
Attenuation along beam>8%
AutoAdaptYes
Digital outputPNP; maximum ≤100 mA; pin-4 output must not be connected to another output
Switching modeLight/dark switching
Pin 2 configurationSelectable external input, teach-in, sender-off input, detection output, logic output or contamination-alarm output
Pin assignment1 BN=L+; 4 BK=QL1/C IO-Link; 2 WH=MF configurable; 3 BU=M
AdjustmentIO-Link and single teach-in button
IO-LinkV1.1; COM2, 38.4 kBaud; cycle 2.3 ms; master port type A; SIO support
Timer functionsDeactivated, switch-on delay, off delay, ON and OFF delay, impulse/one-shot; inverter available
DiagnosticsDevice status, quality of teach, quality of run and contamination display
Power supply10–30 V DC; short-circuit protected network, maximum 8 A
Current consumption20 mA without load
Residual ripple<5 Vpp; remain within supply limits
Protection classIII
Circuit protectionSupply, inputs and output reverse-polarity protection; interference suppression; output overcurrent and short-circuit protection
Housing designSlim rectangular
ConnectionDirect male M8 four-pin connector
IndicatorsGreen power LED; orange received-light LED
Housing materialABS plastic
Front screenPMMA plastic
IP ratingIP66/IP67
Operating temperature−40 to +60 °C
Storage temperature−40 to +75 °C
UL fileNRKH.E181493 & NRKH7.E181493
MTTFD1,222 years
DCavg0%
Physical Weight (kg)0.03
Smart TaskTimestamp + debouncing
Logic functionsDirect, AND, OR, WINDOW, hysteresis
IO-Link process data16 bit; bit 0=QL1, bit 1=QL2; bits 2–15=timestamp
IO-Link identifiersVendorID 26; DeviceID 0x8000E2 / 8388834
Pin-2 output response300–450 µs with resistive load, when pin 2 is configured as Q output by software
Pin-2 output switching frequency1,000 Hz at 1:1 light/dark ratio, when pin 2 is configured as Q output by software
Electronic repeatability150 µs
Operating modesSIO Direct: no IO-Link communication and direct/deactivated logic/timing; SIO Logic: internal logic/timing without IO-Link communication; IO-Link: full communication with logic/timing
Response timeSIO Direct 300–450 µs; SIO Logic 550–650 µs
Response repeatability150 µs in SIO Direct or SIO Logic
Timestamp accuracy−90 to +90 µs over IO-Link
Timestamp buffer8 events over IO-Link
Maximum timestamp range260 ms over IO-Link
Minimum event separation450 µs in SIO Direct or SIO Logic; 500 µs over IO-Link
Maximum debounce time52 ms in SIO Logic or IO-Link
Switching signalsQL1 and QL2 switching outputs

Industrial Applications

1. Counting transparent containers on a packaging conveyor

A packaging conveyor can align the sensor with a PL80A reflector across the container path. The sensor evaluates the reduced returned light as separated transparent containers cross the beam. External counting logic records the switching transitions. Actual wall material, container shape, attenuation, alignment and available gaps are validated within the 0–3 m sensing range.

Problem Solved

Beam-attenuation events provide external counting logic with a reference for separated transparent containers, helping track product flow where a transparent wall may transmit much of the emitted light.

Transparent containers PL80A reflector PNP transitions

2. Recognizing a break in a transparent material web

A material feeder can route a transparent web across the optical path between the sensor and reflector. The sensor distinguishes the attenuated web-present state from the unobstructed reflector return when a break opens the path. External line control evaluates the change against the expected material state, with actual film attenuation, flutter and the selected sensitivity validated during setup.

Problem Solved

A change from the taught material-present return to the clear reflector return identifies a possible web break, allowing external feeder control to respond before subsequent processing runs without material.

Web continuity Beam attenuation External line control

3. Checking event spacing at a conveyor transfer

A conveyor transfer can use optical target transitions as timed process events and send the captured timestamps to external sequence analysis through IO-Link. The eight-event buffer and 260 ms maximum timestamp range provide a bounded event history. Actual transparent targets, attenuation and event spacing are validated against the 500 µs minimum separation in IO-Link mode.

Problem Solved

Captured timestamps give external sequence analysis a reference for transfer events, helping distinguish changed event spacing within the documented buffer, timestamp range and event-separation limits.

Timestamp events IO-Link Sequence analysis
Select your currency