SICK 6044673 WTB250-2N2431 NPN Background Suppression Sensor

USD 262.08

WTB250-2N2431 provides 100–300 mm reference-white sensing, background suppression, NPN output, two-turn adjustment and an M12 four-pin connector.

SKU SICK-6044673 Category
SICK W250-2

SICK WTB250-2N2431 NPN Background Suppression Sensor

BrandSICK
Model IdentifierWTB250-2N2431
Official Part Number6044673

Technical Overview

The SICK WTB250-2N2431 is a rectangular photoelectric proximity sensor with background suppression and an NPN switching output. It provides 100–300 mm sensing on 90% remission reference white, using visible red LED light with a 30 mm spot at 300 mm. A two-turn potentiometer with position indication adjusts sensing range, while the L/D control input selects light/dark switching. The four-pin M12 connector rotates through 90° to support installation. Response is no more than 3 ms with resistive load, with 160 Hz switching at a 1:1 light/dark ratio. The IP67 ABS/PMMA construction operates from −25 to +55 °C; a BEF-W250 bracket is supplied.

NPN background-suppression sensor with 100–300 mm reference-white range, two-turn range adjustment, L/D control input and rotatable M12 four-pin connector.

Key Features

  • Photoelectric proximity sensor with background suppression
  • 100–300 mm sensing and maximum range on 90% remission reference white
  • Visible red LED; Ø30 mm spot at 300 mm; approximately 3° dispersion
  • Two-turn potentiometer with sensing-setting position indication
  • NPN output; light/dark selection through L/D control input
  • ≤3 ms response with resistive load; 160 Hz at 1:1 light/dark ratio
  • 10–30 V DC; 35 mA without load; output current ≤100 mA
  • M12 four-pin male connector, rotatable through 90°
  • ABS housing; PMMA optics; IP67; BEF-W250 mounting bracket included
  • Product weight 40 g; −25 to +55 °C operation

Adjust a nearby detection zone with background suppression and connect its NPN signal to machine logic through a 90° rotatable M12 connector.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric proximity sensor with background suppression
Housing designRectangular
Sensing range100–300 mm on 90% remission reference white (DIN 5033)
Maximum sensing range100–300 mm on 90% remission reference white
Reference-target rangesBlack 6%: 100–240 mm; gray 18%: 100–300 mm; white 90%: 100–300 mm, with white background
Light sourceVisible red LED
Light spot sizeØ30 mm at 300 mm
Focus and dispersion angleApproximately 3°
LED service lifeAverage 100,000 h at ambient +25 °C
AdjustmentTwo-turn potentiometer with position indicator
Position indicator270° sensitivity-setting display shown
Digital outputNPN; maximum current ≤100 mA
Switching modeLight/dark switching selected via L/D control input
Response time≤3 ms; signal transit time with resistive load
Switching frequency160 Hz at 1:1 light/dark ratio
Power supply10–30 V DC; limit values in short-circuit protected network, maximum 8 A
Ripple<5 Vpp; stay within supply tolerances
Current consumption35 mA without load
ConnectionM12 four-pin male connector, rotatable through 90°
Pin assignmentCD-087: 1 BN=L+; 2 WH=L/D; 3 BU=M; 4 BK=Q
Connector positionsVertical final position; horizontal final position can be locked with slider
Circuit protectionSupply connections reverse-polarity protected; inputs/output reverse-polarity protected; interference suppression; outputs overcurrent and short-circuit protected
Protection classIII
Housing materialABS plastic
Optics materialPMMA plastic
IP ratingIP67
Included accessoryBEF-W250 mounting bracket
Mounting holesØ4.2 mm for M4 hexagon nuts on both sides
IndicatorsGreen stability indicator; yellow received-light status
EMCEN 60947-5-2
Operating temperature−25 to +55 °C
Storage temperature−40 to +70 °C
MTTFD536 years
DCavg0%
Physical Weight (kg)0.04

Industrial Applications

1. Detecting a carton in a conveyor zone

A conveyor can aim the sensor at a carton surface while fixed structure lies farther away. The two-turn potentiometer sets the detection zone within the reference-white 100–300 mm range. External zone logic reads the NPN signal, after commissioning checks actual carton reflectance and separation from the background, including the shorter stated black-target range where relevant.

Problem Solved

An occupied-zone signal helps conveyor logic identify a carton at the monitored point, with range adjustment and background suppression supporting detection from one mounting side.

Carton presence Conveyor zone Background suppression

2. Checking an insert at an assembly station

An assembly station can present an expected insert nearer to the sensor than the empty nest surface. Range adjustment establishes the intended target zone, and external inspection logic samples the NPN output when the assembly is stationary. The L/D input selects the switching behavior needed by the control circuit; setup verifies actual insert color, gap and placement tolerance.

Problem Solved

An insert-presence reference helps inspection logic distinguish the expected loaded condition from an empty nest, using a locally adjusted optical zone and selectable output behavior.

Assembly inspection Insert presence L/D input

3. Registering separated trays at a transfer station

A transfer station can pass separated trays through the adjusted sensing zone and send the NPN signal to external counting logic. The ≤3 ms response and 160 Hz specification guide selection of tray spacing and speed. The rotatable M12 connector supports cable routing, while commissioning checks actual tray reflectance, interruption duration and controller input timing.

Problem Solved

A tray-passage event helps counting logic register separated loads, with documented response timing and an adjustable connector position supporting the transfer-station installation.

Tray passage External counting Connector routing
Select your currency