SICK 1049053 WTB9-3N2461 NPN Background Suppression Sensor

USD 159.38

WTB9-3N2461 offers 20–200 mm black-target sensing, red PinPoint LED light, five-turn range adjustment, complementary NPN outputs and M12 four-pin connection.

SKU SICK-1049053 Category
SICK W9

SICK WTB9-3N2461 NPN Background Suppression Sensor

BrandSICK
Model IdentifierWTB9-3N2461
Official Part Number1049053

Technical Overview

The SICK WTB9-3N2461 is a photoelectric proximity sensor with background suppression and complementary NPN outputs. Its sensing range is 20–200 mm on a 6% remission black reference target, while maximum range reaches 20–350 mm on 90% remission reference white. The 650 nm red PinPoint LED produces a 4.5 mm spot at 75 mm, and a five-turn potentiometer adjusts sensing distance. Complementary outputs provide light and dark signals, with Q assigned to light switching. Response is below 0.333 ms with resistive load, with 1,500 Hz switching at a 1:1 light/dark ratio. The 10–30 V DC device uses an M12 four-pin connector, VISTAL housing, PMMA optics and IP66/IP67/IP69K protection.

NPN background-suppression sensor with 20–200 mm black-target sensing, five-turn adjustment, complementary light/dark outputs and M12 four-pin connector.

Key Features

  • Photoelectric proximity sensing with background suppression
  • 20–200 mm sensing on a 6% remission black reference target
  • 20–350 mm maximum range on 90% remission reference white
  • 650 nm red PinPoint LED; Ø4.5 mm spot at 75 mm
  • Five-turn sensing-range potentiometer
  • Complementary NPN outputs; Q is light switching
  • <0.333 ms response with resistive load; 1,500 Hz at 1:1 light/dark ratio
  • 10–30 V DC; 30 mA without load; M12 four-pin male connector
  • VISTAL housing; PMMA optics; IP66 / IP67 / IP69K
  • M3 mounting holes; −40 to +60 °C operation

Adjust the sensing distance to detect a nearby target while suppressing a farther background, then connect the complementary NPN signals to external control.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric proximity sensor with background suppression
Sensing range20–200 mm on a 6% remission black reference target (DIN 5033)
Maximum sensing range20–350 mm on 90% remission reference white (DIN 5033)
Reference-target rangesBlack 6%: 20–200 mm; gray 18%: 20–225 mm; white 90%: 20–350 mm in manufacturer sensing-range diagram
Light sourceVisible red PinPoint LED
Wavelength650 nm
Light spot sizeØ4.5 mm at 75 mm
AdjustmentSensing-range potentiometer, five turns
LED service lifeAverage 100,000 h at ambient +25 °C
Switching outputComplementary NPN outputs
Switching modeLight/dark switching; Q is light switching
Output current≤100 mA; at and above +50 °C ambient, maximum 50 mA
Response time<0.333 ms with resistive load
Switching frequency1,500 Hz at 1:1 light/dark ratio
Power supply10–30 V DC; limit values in a short-circuit-protected network, maximum 8 A
Ripple<5 Vpp; remain within supply tolerances
Current consumption30 mA without load
ConnectionM12 four-pin male connector
Pin assignmentCD-084: 1 BN=L+; 2 WH=Q̅; 3 BU=M; 4 BK=Q
Circuit protectionA: supply reverse-polarity protection; B: inputs and output reverse-polarity protection; C: interference suppression
Housing materialVISTAL plastic
IP ratingIP66 / IP67 / IP69K
MountingM3 mounting holes
IndicatorsYellow: received-light status; green: power on
Operating temperature−40 to +60 °C
Storage temperature−40 to +75 °C
Protection classIII
Optics materialPMMA plastic
MTTFD891 years
DCavg0%
Mission time20 years
UL fileNRKH.E181493
Physical Weight (kg)0.013

Industrial Applications

1. Confirming a component in an assembly nest

An assembly nest can present a component at a repeatable distance facing the sensor. Background suppression provides a switching condition from one mounting side, while the documented adjustment establishes detection for representative components. External inspection logic samples the output after the component settles. Setup verifies actual target reflectance, placement tolerance and background geometry before accepting the installed detection point.

Problem Solved

A component-present reference helps external inspection logic distinguish an occupied assembly location from an empty nest, using commissioned target geometry and the documented adjustment method.

Assembly presence Background suppression External inspection

2. Counting separated components on a guide

A component guide can move separated parts through the optical sensing point and send switching transitions to external counting electronics. Commissioning establishes the working gap and adjustment using representative materials, including the darkest expected target. Part transit time and gaps are checked against the documented response and switching-frequency conditions before setting the counting logic.

Problem Solved

A discrete optical passage signal helps external counting electronics register separated components, using a commissioned sensing point and timing conditions matched to the actual parts feed.

Part counting Target reflectance Timing checks

3. Confirming a carrier at its transfer stop

A transfer stop can bring a defined carrier surface into the sensor’s working distance. External sequencing logic reads the optical switching state after the carrier reaches its seated position. Setup uses the documented adjustment and verifies actual carrier reflectance, gap tolerance and background geometry, then confirms that the selected light/dark behavior matches the connected process input.

Problem Solved

A seated-carrier condition helps external sequencing logic coordinate the next transfer step, using a checked optical gap and switching behavior for the actual carrier surface.

Carrier arrival Transfer stop Process sequencing
Select your currency