USD 17.16
Angled M12 female to flying leads, 2 m unshielded four-wire PUR cable, 0.34 mm² conductors, 4 A, 250 V AC/DC reference rating and drag-chain data.
The SICK YG2A14-020UB3XLEAX is an unshielded 2 m sensor/actuator cable with an angled A-coded M12 four-pin female connector and flying leads. Its four-wire halogen-free PUR cable uses 0.34 mm² conductors, with a black TPU connector, FKM seal and nickel-plated zinc die-cast screw-locking nut.
Unshielded 2 m four-wire halogen-free PUR sensor/actuator cable with angled A-coded M12 four-pin female connector, flying leads and 0.34 mm² conductors.
| Parameter | Value |
|---|---|
| Product type | Sensor/actuator connection cable |
| Head A | angled A-coded M12 four-pin female connector |
| Head B | Flying leads |
| Locking | Screw connection |
| Connector material | TPU |
| Connector color | Black |
| Locking nut material | Zinc die-cast, nickel-plated |
| Seal material | FKM |
| Tightening torque | 0.6 Nm |
| Width across flats | 13 |
| Cable length | 2 m |
| Cable construction | Four-wire unshielded halogen-free PUR |
| Jacket color | Black |
| Cable diameter | 4.5 mm |
| Conductor cross-section | 0.34 mm² |
| Bending radius, flexible | >10 × cable diameter |
| Bending radius, stationary | >5 × cable diameter |
| Bending radius, drag chain | >10 × cable diameter |
| Bending cycles | 10,000,000 |
| Nominal voltage, cable | 300 V AC |
| Test voltage, cable | 2,500 V AC |
| Reference voltage | 250 V AC / 250 V DC |
| Rated impulse voltage | 2.5 kV |
| Current loading | 4 A |
| Traversing speed | 3 m/s |
| Travelling distance | 10 m |
| Acceleration | ≤10 m/s² |
| Torsion | 180° per 1 m |
| Torsion cycles | 2,000,000 |
| Torsion cycling rate | 35 per minute |
| Manufacturer application areas | zones with oils and lubricants; robot; drag chain operation |
| UL file | E335179 |
| IP rating | IP65 / IP66K / IP67 |
| Operating temperature, flexible | −25 to +80 °C |
| Operating temperature, stationary | −40 to +80 °C |
| Operating temperature, drag chain | −25 to +80 °C |
| Operating temperature, head | −25 to +85 °C |
| Contamination rating | 3 |
| Insulation resistance | 100 MΩ |
| Overvoltage category | III |
| Flame retardance | UL 1581 horizontal flame test / CSA FT2 / IEC 60332-1 / IEC 60332-2-2 |
| Pin colors | 1 BN=brown; 2 WH=white; 3 BU=blue; 4 BK=black; drawing position 5 not connected |
| Connector-only drawing | 39 mm longitudinal span, 28 mm height and Ø15 mm coupling |
