USD 41.34
Straight D-coded M12 four-pin male connector for shielded CAT5/CAT5e PROFINET wiring, with IDC termination, 4–8 mm cable acceptance and IP67.
The SICK STE-1204-GZ is a straight D-coded M12 four-pin male connector for shielded CAT5/CAT5e PROFINET wiring. IDC quick termination and a quick screw connection accept 4–8 mm cable with 0.14–0.34 mm² conductors; the die-cast zinc locking nut and IP67 head are specified for −40 to +85 °C.
Shielded D-coded M12 four-pin male field-wireable connector with IDC termination for CAT5/CAT5e PROFINET cable.
Terminate a shielded CAT5/CAT5e PROFINET cable at a D-coded M12 male interface using IDC contacts and the quick screw connection.
| Parameter | Value |
|---|---|
| Connector type | Male connector, M12, four-pin, straight, D-coded |
| Termination | IDC quick connection |
| Locking connection | Quick screw connection |
| Locking nut material | Die-cast zinc |
| Cable categories | CAT5; CAT5e |
| Shielding | Shielded |
| Permitted cable diameter | 4–8 mm |
| Permitted conductor cross-section | 0.14–0.34 mm² |
| Reference voltage | ≤60 V |
| Current loading | 1.75 A |
| Signal type | PROFINET |
| IP rating | IP67 |
| Head operating temperature | −40 to +85 °C |
| Wrench sizes | SW13 and SW16 in manufacturer drawing |
| Cable preparation | Installation drawing: 35 mm outer preparation, 11 mm shield-end section and 3 mm final trimming detail |
| Dimensions L x W x H (cm) | 6.1 x 1.9 x 1.9 |