Connection		Power Rail or terminals 14+, 15-
Rated voltage	U_r	19 … 30 V DC
Ripple		≤ 10 %
Rated current	I_r	≤ 30 mA at 24 V
Power dissipation		≤ 600 mW at 20 mA and 500 Ω load
Power consumption		≤ 700 mW

Input

Connection side	control side
Connection	terminals 7-, 8+, (9+)
Input signal	4 … 20 mA , limited to approx. 30 mA
Input voltage	open loop voltage of the control system ≤ 30 V
Voltage drop	approx. 6 V at 20 mA
Input resistance	field wiring open circuit : > 100 kΩ field wiring < 50 Ω : > 100 kΩ when using terminals 1 and 2

Output

Connection side	field side
Connection	terminals 1+, 2- terminals 3+, 2- (no short circuit detection)
Voltage	≥ 13 V at 20 mA
Current	4 … 20 mA
Load	100 … 650 Ω , for terminals 1, 2 0 … 550 Ω , for terminals 2, 3
Ripple	20 mV rms
Line fault detection	breakage, load > 100 kΩ, short-circuit, load < 50 Ω

Fault indication output

Output type

open collector transistor (internal fault bus)

Transfer characteristics

Deviation

at 20 °C (68 °F), 4 … 20 mA
< 0.1 % of full scale, incl. non-linearity and hysteresis

Influence of ambient temperature

< 2 µA/K (-20 … 70 °C (-4 … 158 °F)); < 4 µA/K (-40 … -20 °C (-40 … -4 °F))

Frequency range

field side into the control side: bandwidth with 0.5 V_pp signal 0 … 3 kHz (-3 dB)
control side into the field side: bandwidth with 0.5 V_pp signal 0 … 3 kHz (-3 dB)

Rise time

10 to 90 % ≤ 10 ms

Galvanic isolation

Input/Output	basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Input/power supply	basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Output/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff

Indicators/settings

Display elements	LEDs
Labeling	space for adhesive label at the front

Directive conformity

Electromagnetic compatibility

Directive 2014/30/EU

EN 61326-1:2013 (industrial locations)

Conformity

Electromagnetic compatibility	NE 21:2017 EN 61326-3-2:2018
Degree of protection	IEC 60529
Protection against electrical shock	UL 61010-1:2012

Ambient conditions

Ambient temperature

-40 … 70 °C (-40 … 158 °F)

Mechanical Specifications

Degree of protection	IP20
Connection	screw terminals
Mass	approx. 115 g
Dimensions	20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001

Data for application in connection with hazardous areas

EU-type examination certificate

BAS 00 ATEX 7240 X

Marking		II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Output		Ex ia, Ex iaD
Voltage	U_o	25.2 V
Current	I_o	93 mA
Power	P_o	585.3 mW
Internal capacitance	C_i	1.05 nF
Internal inductance	L_i	0

Supply

Maximum safe voltage

U_m

250 V _rms (Attention! The rated voltage can be lower.)

Input

Maximum safe voltage

U_m

250 V _rms (Attention! The rated voltage can be lower.)

Certificate

FIDI 22 ATEX 0002 X

Marking

II 3G Ex ec IIC T4 Gc

Galvanic isolation

Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V

Directive conformity

Directive 2014/34/EU

EN IEC 60079-0:2018 , EN 60079-11:2012 , EN IEC 60079-7:2015+A1:2018